We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
10 ft braided stainless steel CPE fuel hose, silver, AN8 1/2

Unique-Bargains

Unique-Bargains 10 ft AN8 1/2" Braided Stainless Steel CPE Fuel Hose

SKU CH-K5A8-XEYNV

A 10 ft AN8 braided stainless-steel CPE hose rated to 1000 PSI working and 5000 PSI burst for fuel, oil, coolant or air lines from -40 °F to 350 °F

  • Handles fuel, coolant, oil and air for auto or marine engines
  • Withstands -40 °F to 350 °F operating temperature range
  • 1000 PSI working pressure and 5000 PSI burst rating for high-demand systems
  • Braided stainless steel over CPE resists heat, corrosion and abrasion
  • 10 ft length with .43 in inner diameter and .64 in outer diameter

Universal 10 ft AN8 Braided Fuel Hose

This 10 ft AN8 hose handles fuel, lube, coolant and air on cars or marine engines. The CPE inner tube resists heat, corrosion and abrasion while the stainless-steel braid adds structural strength. It suits racing cars and motor racing bikes as well as everyday automotive plumbing.

Upgrade from rubber or unbraided lines

Factory rubber hoses can swell, crack or permeate over time, especially near exhaust headers or in high-pressure EFI systems. This braided CPE line holds 1000 PSI working pressure with a 5000 PSI burst margin, so the jump is worth it whenever pressure spikes or temperature cycles exceed what plain rubber can survive.

Steady pressure and temperature performance

The hose operates from -40 °F to +350 °F without softening or hardening, keeping flow consistent during long stints. At 0.43 in inner diameter and 0.64 in outer diameter it maintains its cross-section under clamp load, so pressure drop stays predictable lap after lap.

Highlights

  • Handles fuel, coolant, oil and air for auto or marine engines
  • Withstands -40 °F to 350 °F operating temperature range
  • 1000 PSI working pressure and 5000 PSI burst rating for high-demand systems
  • Braided stainless steel over CPE resists heat, corrosion and abrasion
  • 10 ft length with .43 in inner diameter and .64 in outer diameter

Specifications

BrandUnique Bargains

Questions about this item

What clearance is needed for the 16 mm outer diameter hose?

The hose has an outside diameter of 0.64" (16 mm), so allow at least that much space around the routing path for the braided cover and end fittings.

How do I cut the CPE liner without fraying the stainless braid?

Wrap the cut area tightly with masking tape, cut through the tape with a fine-tooth hacksaw or rotary tool, then remove the tape and slide the AN8 fittings onto the clean ends.

When should the hose be replaced given the 350 °F temperature rating?

Inspect annually; replace if the CPE liner shows hardening, surface cracks, or any sign of leakage, especially after repeated exposure near the 350 °F limit.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.