We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
White cylindrical socket adapter with E26 E27 threads and front sensor lens

Meterk Infrared Motion Sensor Light Socket E26 E27 Automation Signaling

SKU CH-PBPF-S93QC

An infrared motion sensor adapter that screws into E26 or E27 sockets to automate any bulb with adjustable duration and sensitivity

  • Effortless setup with simple screw-in installation into existing E26 or E27 sockets
  • Intelligent motion activation detects movement and conserves energy by staying off during daylight
  • Customizable lighting with adjustable duration from 10 seconds to 5 minutes and sensitivity from 3 to 2000 lux
  • Versatile application for indoor and outdoor spaces including garages basements porches and stairwells
  • Hands-free convenience and safety assured with PBT flame-resistant housing rated at 160°C

Smart Motion Socket Adapter

The Meterk Infrared Motion Sensor Light Socket screws into standard E26 or E27 bases and converts any compatible bulb into an automatic light. It installs without tools or extra wiring by sitting between the socket and the lamp. The unit suits homeowners and renters who want hands-free illumination in dark areas without rewiring fixtures.

Fits Standard Screw Bases Only

This adapter works with LED, CFL and incandescent bulbs in E26 or E27 holders, making it useful for garages, basements, porches, closets and stairwells. It is not suited for bayonet, GU10, pin-base or other non-Edison sockets, nor for fixtures where the sensor’s field of view would be blocked by a shade or enclosure.

Adjustable Range and Duration

Sensitivity adjusts from 3 to 2000 lux so the light triggers only when ambient levels drop, while the on-time spans 10 seconds to 5 minutes with a suggested initial setting of 150 to 220 seconds. The PBT housing withstands 160 °C, giving headroom for typical bulb heat, but the sensor cannot dim lights or control multiple circuits from a single unit.

Highlights

  • Effortless setup with simple screw-in installation into existing E26 or E27 sockets
  • Intelligent motion activation detects movement and conserves energy by staying off during daylight
  • Customizable lighting with adjustable duration from 10 seconds to 5 minutes and sensitivity from 3 to 2000 lux
  • Versatile application for indoor and outdoor spaces including garages basements porches and stairwells
  • Hands-free convenience and safety assured with PBT flame-resistant housing rated at 160°C

Specifications

BrandMeterk
ModelHand Rivet Nut Setter Kit
Part NumberInfrared-073

Questions about this item

What type of bulb socket must I already have for the Meterk adapter to fit?

The adapter screws directly into an existing E26 or E27 Edison socket, so you need one of those standard bases already installed.

Will the sensor activate the light if I keep a CFL or incandescent bulb instead of an LED?

Yes, the unit works with LED, CFL and incandescent bulbs, so older bulb types you already own will still trigger the motion activation.

How can I verify the sensor is set correctly after I install it?

Walk past the fixture at night; the light should turn on, then switch off again after the delay you set between 10 seconds and 5 minutes.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.