We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Two black rectangular gate remotes with visor clips and ten dip switches each

Meterk 2× 10-Dip 300 MHz Linear 308911 Gate Remote

SKU CH-13KS-QZ3YV

Two 300 MHz 10-dip-switch remotes for Linear 308911 receivers with 120-foot range and visor clips

  • TypePush Buttons
  • Size/Dimensions3.81 cm x 10.5918 cm x 16.7894 cm
  • Standards/CertificationsUL Listed/CSA Certified
  • Color/FinishBlack
  • Compatibility/FitmentOut-Opening, Narrow Stile, Store Front Doors
  • Color DisplayTwo
  • 10 dip-switch coding secures your gate signal
  • 300 MHz frequency matches Linear 308911 receivers exactly
  • 120-foot range lets you open from the car
  • Two remotes and CR2032 batteries included for immediate use
  • Visor clip keeps the transmitter within easy reach

Compatible Linear 308911 Replacement

This remote operates on 300 MHz and uses a 10 dip switch configuration to match Linear Multicode 308911 receivers only. It is not a universal remote and will not work with other brands or frequencies. The package includes two transmitters, each supplied with a CR2032 battery and a visor clip for vehicle mounting.

Sustained Range And Security

The transmitter delivers a working distance of 120 feet, allowing reliable activation from the driver's seat during daily use. Code security depends on setting a unique 10 digit sequence on the dip switches that matches the receiver exactly. No rolling code or encryption technology is present; the fixed code remains constant until the switches are physically changed.

Single Channel 10 Dip Switch Constraint

The decisive specification is the 10 dip switch, 300 MHz, single channel design that only pairs with Linear Multicode 308911 receivers. Buyers who need multi-channel control, rolling code security, or compatibility with Liftmaster, Chamberlain, Genie or other brands cannot use this remote. Programming requires manual switch alignment and the included DIY video.

Highlights

  • 10 dip-switch coding secures your gate signal
  • 300 MHz frequency matches Linear 308911 receivers exactly
  • 120-foot range lets you open from the car
  • Two remotes and CR2032 batteries included for immediate use
  • Visor clip keeps the transmitter within easy reach

Specifications

TypePush Buttons
BrandMeterk
ModelHand Rivet Nut Setter Kit
Size/Dimensions3.81 cm x 10.5918 cm x 16.7894 cm
Standards/CertificationsUL Listed/CSA Certified
Color/FinishBlack
Compatibility/FitmentOut-Opening, Narrow Stile, Store Front Doors
Color DisplayTwo
Part Number56151-567

Questions about this item

How much power does each remote draw when used daily?

Each unit runs on two CR2032 coin cells; typical current draw is in the microamp range so the batteries last months under normal daily use.

What existing receiver must I already have for these remotes to function?

You need a Linear Multicode 308911 receiver operating at 300 MHz with its 10 dip switches set to the same code pattern you will program into the remotes.

Will these work alongside an older Linear 300 MHz receiver that uses a different dip-switch count?

No — the remotes transmit a fixed 10 digit code, so the receiver must also be a 10 dip switch 300 MHz Linear 308911 unit; other dip-switch counts will not respond.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.