We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Cylindrical stainless steel pressure transducer with 1/8 inch NPT thread and attached wiring harness

Meterk 100 PSI Pressure Transducer Sensor 1/8" NPT 316 Stainless Steel

SKU CH-VYKP-B4WFR

Measures 0-100 PSI with 0.5V-4.5V linear output on a 1/8"-27 NPT 316 stainless steel body

  • Length3 L x 2 W x 1 H inches
  • Accurate readings within ±2% full scale across temperatures
  • Linear 0.5V-4.5V output from 5V DC supply
  • 316 stainless steel and ceramic construction resists corrosion
  • 1/8"-27 NPT thread fits standard hydraulic ports
  • Measures oil, fuel, gas, water and air pressure

0-100 PSI Pressure Transducer

This Meterk sensor measures fluid pressure from 0 to 100 PSI and outputs a 0.5V to 4.5V linear signal powered by a 5V DC supply. It features a 1/8"-27 NPT thread and a 316 stainless steel body with a ceramic sensing element for corrosion resistance. The compact unit includes a connector harness for direct wiring into control systems.

Suits monitoring oil fuel air water

Engineers and technicians monitoring hydraulic pressure in tanks, lines or test rigs will find the 0.5V-4.5V output compatible with common data loggers and ECUs. The ±2% full-scale accuracy covers oil fuel gas water and air across the full temperature range. Buyers needing a range above 100 PSI or a different thread standard should select another model.

1/8"-27 NPT thread decides fit

The 1/8"-27 NPT male thread is the single specification that determines whether this transducer seals correctly in the target port. Verify the port size and pressure rating before purchase because an incorrect thread will leak or damage the housing. The 316 stainless steel construction resists the media listed but thread compatibility is mandatory.

Highlights

  • Accurate readings within ±2% full scale across temperatures
  • Linear 0.5V-4.5V output from 5V DC supply
  • 316 stainless steel and ceramic construction resists corrosion
  • 1/8"-27 NPT thread fits standard hydraulic ports
  • Measures oil, fuel, gas, water and air pressure

Specifications

BrandMeterk
Length3 L x 2 W x 1 H inches
Part NumberBY-PSI-0416

Questions about this item

What does the 0.5V to 4.5V output range mean when the sensor is connected to a 5V system?

The sensor outputs .5V at zero pressure and 4.5V at 100 PSI, giving a linear 4V span that fits inside a standard 5V ADC input without hitting the rails.

How does the 1/8"-27 NPT thread limit the pressure rating in practice?

The 1/8"-27 NPT thread seals to the sensor's 100 PSI range; the fitting itself is rated well above that, so the transducer remains the limiting component.

What clearance does the 3 x 2 x 1 inch body need for installation?

The compact 3 L x 2 W x 1 H inch housing fits in tight engine bays or hydraulic blocks and only requires a 1/8" NPT port plus room for the connector harness.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.