Meterk 150 PSI Oil Fuel Pressure Sensor Transducer 1/4 NPT Stainless Steel
Measures oil, fuel, air, gas and water pressure from 0 to 150 PSI with a 0.5 to 4.5V output and 1/4 NPT stainless steel fitting
- Voltage125VAC
- Length1.97 L x 0.79 W x 0.79 H inches
- Monitors oil fuel air gas water pressure up to 150 PSI
- 1/4 NPT thread enables secure installation in compatible systems
- 5 to 4.5V linear output delivers stable pressure data to gauges
- Stainless steel body with ceramic element resists corrosion across environments
- Operates from -40°C to 125°C for automotive and industrial use
150 PSI Pressure Sensor Transducer
The Meterk transducer measures oil, fuel, air, gas or water pressure from zero to 150 PSI and outputs a 0.5-4.5V linear signal. A 1/4" NPT thread and stainless steel body with a ceramic sensing element provide corrosion resistance. Operating temperature spans -40°C to 125°C for automotive and industrial monitoring. A harness kit is included in the package.
Verify Thread Size And Voltage Before Fitting
Confirm that the existing port uses a 1/4" NPT thread and that the system voltage matches the 125VAC rating. The sensor requires a monitoring device or control unit compatible with a 0.5-4.5V output signal. Check that the application pressure stays within the 0-150 PSI range and that the -40°C to 125°C temperature envelope covers the installation environment.
Suits Builders Needing A 150 PSI Sender
This unit suits technicians replacing a sender in fuel, oil, air, gas or water circuits that accept a 1/4" NPT thread and a 0.5-4.5V signal. Buyers who need a different pressure range, a different thread standard, a current-loop output or a non-stainless housing should look at alternative sensors.
Highlights
- Monitors oil fuel air gas water pressure up to 150 PSI
- 1/4 NPT thread enables secure installation in compatible systems
- 5 to 4.5V linear output delivers stable pressure data to gauges
- Stainless steel body with ceramic element resists corrosion across environments
- Operates from -40°C to 125°C for automotive and industrial use
Specifications
| Brand | Meterk |
|---|---|
| Voltage | 125VAC |
| Length | 1.97 L x 0.79 W x 0.79 H inches |
| Part Number | 150 Psi Pressure Sensor |
Questions about this item
Does the box contain only the sensor or is the wiring harness included?
The package includes one 150 PSI oil fuel pressure sensor transducer and one harness kit, so the wiring is supplied with the sensor.
How do I decide between the available pressure ranges for this transducer?
This model has a single 0-150 PSI measurement range; choose it when your system pressure falls within that span.
What does the 0.5-4.5V output mean when the sensor is installed in my vehicle?
The sensor delivers a linear 0.5 to 4.5 volt signal that corresponds to the 0-150 PSI range, allowing compatible gauges or ECUs to read pressure accurately.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
