Mean Well
Mean Well GS60A48 48V 1.25A 60W power adapter 5.5x2.0 mm
A 60W AC adapter delivering 48V at 1.25A with a 5.5×2.0 mm barrel plug, operating on 100-240V input and including a power cord
- Universal 100-240V input works worldwide
- 48V 1.25A output delivers stable 60W power
- 5x2.0mm barrel plug fits compatible devices
- Built-in IV, SC and IO protection safeguards equipment
- Includes power cord for immediate use
48 V 1.25 A desktop power adapter
The Mean Well GS60A48 delivers a regulated 48 V output at up to 1.25 A for equipment that requires a 60 W external supply. It accepts a universal 100-240 V AC input at 50/60 Hz, so it works on mains worldwide without a voltage switch. The barrel connector measures 5.5 mm outer by 2.0 mm inner diameter, matching many industrial and networking devices. A detachable AC power cord is included in the box.
Replaces a failed or lost 48 V 60 W brick
This unit is a direct swap when the original adapter for a 48 V device stops working or goes missing. The upgrade is worthwhile if the previous supply ran hot, lacked safety certifications, or used a proprietary plug that limited replacement options. It is not suitable for hardware that demands more than 60 W or a different output voltage.
Plug-and-play barrel connection
Installation is as simple as connecting the barrel jack to the device and plugging the IEC cord into a wall socket. No drivers, configuration or soldering are required. The most common issue is a polarity or connector-size mismatch, so verify that the equipment expects a centre-positive 5.5x2.0 mm plug before powering on.
Highlights
- Universal 100-240V input works worldwide
- 48V 1.25A output delivers stable 60W power
- 5x2.0mm barrel plug fits compatible devices
- Built-in IV, SC and IO protection safeguards equipment
- Includes power cord for immediate use
Specifications
| Model | GS60A48 |
|---|
Questions about this item
What size DC plug does the GS60A48 use to connect to my device?
The adapter terminates in a 5.5 mm outer diameter by 2.0 mm inner diameter barrel connector carrying 48 V at 1.25 A.
How do I connect the included power cord to the adapter?
Plug the supplied IEC C7 figure-8 mains lead into the adapter's built-in C8 inlet then into a 100-240 V 50/60 Hz wall socket.
When should I plan to replace the GS60A48?
Replace the unit if the output voltage drops below 48 V under load, the housing becomes hot to the touch, or the barrel plug shows worn or intermittent contact.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
Black Box Corporation
Black Box Corporation CAT6 EZ-RJ45 Modular Plugs 100-Pack
$95.99
0.00114708BTC
In stock
