We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Three blue SATA cables with straight and 90-degree locking connectors

Mcsher 4348427939 3 Pack 20 Inch SATA III 6.0 Gb/s Cable 90 Degree Locking Latch

SKU CH-3AZW-RBV1D

Three 20-inch SATA III cables with 90-degree locking connectors support 6.0 Gb/s data transfer and backward compatibility with 3.0 and 1.5 Gb/s devices

  • TypeSATA
  • ColorBlue
  • Connector DetailSata Data Connector
  • Terminal GenderFemale-to-Female
  • Speed6 gigabytes_per_second
  • ConductorCopper
  • Locking latch prevents accidental disconnection during operation
  • 90-degree connector fits tight chassis spaces easily
  • 0 Gb/s SATA III supports maximum drive speed
  • Backwards compatible with 3.0 and 1.5 Gb/s devices
  • Three cables provide spare connections for multiple drives

What you get

Three 20-inch SATA III cables with a straight locking-latch connector on one end and a 90-degree connector on the other. The pack suits builders fitting multiple SSDs or hard drives where space is tight and a secure connection matters. Each cable uses copper conductors and supports the 6.0 Gb/s data rate.

Practical limits of the SATA III interface

The interface caps at 6.0 Gb/s and is backward compatible with 3.0 Gb/s and 1.5 Gb/s devices. Cable length is fixed at 49 cm, so drives must sit within that reach of the motherboard or controller port. The 90-degree plug eases routing in cramped chassis but cannot be reoriented after installation.

The deciding spec

Connector gender is female-to-female, meaning both ends plug into standard 7-pin SATA headers on drives and motherboards. Verify that your devices present male headers before purchase; this cable will not fit male-to-male or eSATA ports.

Highlights

  • Locking latch prevents accidental disconnection during operation
  • 90-degree connector fits tight chassis spaces easily
  • 0 Gb/s SATA III supports maximum drive speed
  • Backwards compatible with 3.0 and 1.5 Gb/s devices
  • Three cables provide spare connections for multiple drives

Specifications

BrandMcsher
Model4348427939
TypeSATA
ColorBlue
Connector DetailSata Data Connector
Terminal GenderFemale-to-Female
Speed6 gigabytes_per_second
ConductorCopper
FeaturesData Transfer

Questions about this item

Should I pick the straight or 90-degree connector for my build?

Each pack contains three cables, each with one straight locking-latch connector and one 90-degree connector, so you can route the straight end to the motherboard and the right-angle end to a drive in a tight bay.

Will the 6.0 Gb/s rating actually give me that speed on my SSD?

The cable meets the SATA III 6.0 Gb/s specification and is backward compatible with 3.0 Gb/s and 1.5 Gb/s devices; real-world throughput will be limited by the drive and controller, not the cable.

Does the SATA III interface cap performance on older motherboards?

The cable uses the standard SATA III interface and will negotiate down to 3.0 Gb/s or 1.5 Gb/s on SATA II or SATA I ports, so it works without capping the link beyond what the port supports.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.