Maxxima
Maxxima Stop Light Bar Rectangular Red 15-1/2" M63319R
Rectangular LED stop light bar, 15-1/2 inches long, hardwired at 12.8V DC drawing 140 mA and 20 mA, meets J1957, J2042, J592, P2, P3, U3 standards
- LED stop lamp draws only 140 mA for efficient operation
- Hardwired 12.8 V DC connection installs permanently on vehicle exterior
- Meets SAE J1957, J2042, J592, P2, P3, U3 safety standards
- Polycarbonate lens with aluminium and nylon housing resists vibration and weather
- Rectangular 15-1/2 inch red bar provides wide rear visibility
Maxxima Rectangular Red Stop Light Bar
The Maxxima M63319R is a 15-1/2 inch rectangular LED stop light bar designed for permanent exterior mounting on vehicles. Its polycarbonate lens and aluminium-nylon housing meet J1957, J2042, J592, P2, P3 and U3 standards for commercial and fleet applications.
Verify 12.8V DC system and hardwired installation
Confirm the vehicle operates on a 12.8V DC electrical system before ordering. The unit requires a permanent hardwired connection drawing 140 mA and 20 mA; ensure the mounting location accommodates the 15-1/2 inch length, 1 1/4 inch height and 3/4 inch width.
Hardwired design means no plug supplied
The hardwired connection eliminates the need for a separate plug or harness but requires the installer to splice directly into the vehicle wiring. No additional brackets, connectors or software are included in the package.
Highlights
- LED stop lamp draws only 140 mA for efficient operation
- Hardwired 12.8 V DC connection installs permanently on vehicle exterior
- Meets SAE J1957, J2042, J592, P2, P3, U3 safety standards
- Polycarbonate lens with aluminium and nylon housing resists vibration and weather
- Rectangular 15-1/2 inch red bar provides wide rear visibility
Specifications
| Brand | Maxxima |
|---|
Questions about this item
Does the 15-1/2" stop light bar arrive with mounting brackets and a wiring harness, or must I source those separately?
The unit is designed for permanent mounting and hardwired installation; brackets and a harness are not included and must be obtained separately.
The specs list 140 mA and 20 mA draws at 12.8V DC — which figure applies to the stop function and which to the tail function?
The higher 140 mA draw corresponds to the stop lamp output, while the lower 20 mA draw applies to the tail lamp circuit.
What do the J1957, J2042, J592, P2, P3 and U3 markings mean for on-road legality?
Those SAE codes certify the lens meets photometric and colour requirements for stop, tail and rear-reflex functions on public roads.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
