We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

Maximm CAT6-CCA-BLACK 200 ft Cat 6 network ethernet cable

SKU CH-6942-28BRQ

A 200 ft Cat 6 UTP patch cable with 24 AWG CCA conductors, gold-plated RJ45 connectors and 550 MHz bandwidth for 10 Gbps Ethernet

  • TypeRound
  • Cat6
  • Connector ARJ45
  • ColorBlack
  • ShieldedHigh Speed
  • FeaturesData Transfer, Heat Resistant, High Speed, Lightweight, Low
  • Supports 10 Gbps data rates up to 550 MHz bandwidth
  • 24 AWG copper-clad aluminum conductors with HDPE insulation for signal integrity
  • Gold-plated RJ45 connectors resist corrosion and ensure reliable contact
  • Snagless molded boots and strain relief protect connections during installation
  • Meets ANSI/TIA-568-C.2, REACH and RoHS compliance standards

Maximm CAT6-CCA-BLACK 200 ft cable

This 200 ft Cat 6 Ethernet cable provides a wired LAN connection for PCs, laptops, servers, routers, switches, printers, NAS devices and streaming boxes. The round UTP construction uses 24AWG copper-clad aluminum conductors with HDPE insulation and a PVC jacket. Gold-plated RJ45 connectors feature molded snagless boots and strain relief for secure ports.

Suits runs up to 550 MHz bandwidth and 10Gbps speeds

Home and office installers who need a single 200 ft pull for 10BASE-T, 100BASE-TX, 1000BASE-T or 10GBASE-T links will find the length and spec match. Builders who require shielded cable for noisy environments, solid bare copper conductors for PoE loads, or shorter patch leads should look at other products.

200 ft length sets the maximum run distance

At 200 ft this cable stays within the 100 m channel limit for Cat 6 performance at 550 MHz. The four-pair stranded design with a separator reduces crosstalk, while ANSI/TIA-568-C.2, REACH and RoHS compliance confirms the build standard for structured wiring jobs.

Highlights

  • Supports 10 Gbps data rates up to 550 MHz bandwidth
  • 24 AWG copper-clad aluminum conductors with HDPE insulation for signal integrity
  • Gold-plated RJ45 connectors resist corrosion and ensure reliable contact
  • Snagless molded boots and strain relief protect connections during installation
  • Meets ANSI/TIA-568-C.2, REACH and RoHS compliance standards

Specifications

BrandMaximm
ModelCAT6-CCA-BLACK
TypeRound
Cat6
Connector ARJ45
ColorBlack
ShieldedHigh Speed
FeaturesData Transfer, Heat Resistant, High Speed, Lightweight, Low Voltage

Questions about this item

How do I install the 200 ft Cat 6 cable and what step is often missed?

Route the cable, press each RJ45 connector until the latch clicks, then verify the link lights show 1000BASE-T or 10GBASE-T; the step many skip is confirming the negotiated speed instead of assuming it.

What maintenance or replacement will the 24AWG copper-clad aluminum cable need over time?

Inspect the PVC jacket and molded snagless boots for cracks or kinks; replace the cable if the jacket is damaged or if connectors become loose, since the CCA conductors cannot be re-terminated reliably.

What limit appears first on a 200 ft run at 550 MHz bandwidth under sustained 10Gbps traffic?

At 200 ft the 10GBASE-T distance limit for Cat 6 is reached before the 550 MHz rating, so sustained 10Gbps may drop to 1Gbps if the channel exceeds the allowed length.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.