We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Manw Mini SAS SFF-8643 to four SATA cable, half-metre length

Manw

Manw Mini SAS SFF-8643 to 4x SATA Cable 0.5M

SKU CH-2GGQ-K7F9S

Connects a Mini SAS SFF-8643 host port to four SATA drives over a .5 metre cable

  • Connect RAID controllers to four drives with SFF-8643 host interface
  • Compact SFF-8643 connector enables higher port density on internal hosts
  • 5 metre length suits tight chassis cable routing
  • 12 Gb SAS interface supports high-throughput storage workloads
  • Four SATA targets attach standard hard drives to the controller

Host-to-drive connectivity

This Manw cable links a Mini SAS SFF-8643 host port on a motherboard or RAID controller to four SATA hard drives. It is intended for builders adding internal storage arrays where the controller presents an SFF-8643 interface. The 0.5 m length suits compact chassis routing. Buyers whose backplane uses SFF-8643 cannot use this cable.

Connector layout and build

The SFF-8643 plug reduces PCB footprint compared with older Mini SAS types, allowing denser port arrangements on the host side. Four 7-pin SATA connectors fan out toward the drives, each locking securely to prevent accidental disconnection during drive swaps. Hybrid design supports a transition path from 6 Gb to 12 Gb SAS signalling without cable replacement.

Signal integrity and power

Shielded construction preserves signal quality at 12 Gb speeds across the 1.6 ft run, minimising errors in high-throughput workloads. The cable draws no external power; all signalling power comes from the host controller. Passive wiring keeps heat output negligible and adds no audible noise to the system.

Highlights

  • Connect RAID controllers to four drives with SFF-8643 host interface
  • Compact SFF-8643 connector enables higher port density on internal hosts
  • 5 metre length suits tight chassis cable routing
  • 12 Gb SAS interface supports high-throughput storage workloads
  • Four SATA targets attach standard hard drives to the controller

Specifications

BrandManw

Questions about this item

What speed does the SFF-8643 interface cap at in practice?

The SFF-8643 connector supports 12 Gb SAS, so the cable can carry up to 12 Gb per lane to each attached drive.

What physical space does the 0.5M cable need to fit inside a chassis?

At 1.6 ft long, the cable needs enough clearance for the SFF-8643 plug at the controller plus four SATA connectors routed to the drive bays.

How is the cable installed, and which orientation step do people get wrong?

Plug the SFF-8643 end into the host controller port, then connect each 7-pin SATA plug to a drive; the SFF-8643 side is host-only and will not work if plugged into a backplane.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.