We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Short 15cm Y cable with 4-pin Molex plug and two SATA power sockets

Manw

Manw IDE 4Pin to Dual SATA Power Y Splitter Cable 15cm

SKU CH-QJRD-642B2

Converts one IDE 4Pin power connector into two SATA 15Pin ports for dual drives with a compact 15cm length

  • Splits one IDE 4Pin into two SATA power ports for dual drives
  • 15cm short length keeps cabling tidy and improves case airflow
  • Delivers stable 5V and 12V power to 2.5 SSD and 3.5 HDD
  • Thick wire core reduces voltage drop to prevent drive freezes
  • Snap-lock SATA connectors resist vibration for reliable long-term connection

Compact IDE-to-SATA Power Splitter

This 15 cm Y-splitter converts a single IDE 4Pin Molex connector into two SATA 15Pin power ports. It is designed for builders who need to power additional 2.5" SSDs or 3.5" HDDs inside tight mini-ITX cases or compact NAS enclosures. The short length keeps internal cable routing clean and supports better chassis airflow.

Short Length and Locking Connectors

The 15 cm cable eliminates excess slack that can obstruct airflow in small builds. Snap-lock SATA terminals secure each drive connection against vibration-induced disconnection. Thick conductive wire cores maintain stable 5 V and 12 V delivery to both devices simultaneously, preventing drive drop-outs during heavy read-write workloads.

Ideal for Legacy PSU Upgrades

Suits users adding SATA storage to power supplies that only offer Molex outputs, avoiding a full PSU replacement. Not suited for builders who require longer cable runs for full-tower routing or need to power more than two drives from a single Molex source.

Highlights

  • Splits one IDE 4Pin into two SATA power ports for dual drives
  • 15cm short length keeps cabling tidy and improves case airflow
  • Delivers stable 5V and 12V power to 2.5 SSD and 3.5 HDD
  • Thick wire core reduces voltage drop to prevent drive freezes
  • Snap-lock SATA connectors resist vibration for reliable long-term connection

Specifications

BrandManw

Questions about this item

Will the IDE 4Pin connector on this splitter wear out and need replacing?

The IDE 4Pin male input plugs directly into the power supply Molex connector and has no moving parts; it is designed for long-term continuous operation without scheduled replacement.

What stops me from adding more drives to the two SATA power ports?

Each SATA 15Pin female port supplies stable 5V and 12V power; the total available current is limited by the single IDE 4Pin source from the power supply.

Does the 15cm cable run hot or draw extra power when both drives run all day?

Thick conductive wire cores reduce voltage drop, so the cable itself does not generate significant heat and adds no measurable power draw beyond the connected drives.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.