We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Five short black cables with white 4-pin and black 15-pin connectors

Manw

Manw 4 Pin Molex to 15 Pin SATA Power Cable Adapter

SKU CH-6HVW-RJQ0G

Converts legacy Molex LP4 power connectors to 15-pin SATA for drives or optical units

  • Powers SATA drives from legacy Molex LP4 ports
  • 4-inch straight connectors simplify internal cable routing
  • Five adapters included for multiple drive installations
  • Male 4-pin to female 15-pin SATA power conversion
  • New condition ensures reliable power delivery

Connect legacy Molex power to SATA drives

This five-pack of adapters converts a power supply's 4-pin Molex LP4 connectors into 15-pin SATA power plugs. Builders upgrading older chassis can add modern hard drives or optical drives without replacing the PSU. Each cable measures four inches, keeping internal routing tidy in compact cases.

Straight connectors simplify tight routing

The male Molex and female SATA ends are both straight, so they sit flush against drive bays and power-supply cables. No right-angle bends means less strain on ports and easier cable management behind motherboard trays. Five identical adapters let you power multiple drives from a single Molex daisy chain.

Steady power delivery under continuous load

Copper conductors and moulded strain relief maintain stable voltage during prolonged drive activity such as large file transfers or RAID rebuilds. The short length minimises resistance, reducing heat buildup inside the case. Drives that demand consistent spin-up current receive it without voltage sag.

Highlights

  • Powers SATA drives from legacy Molex LP4 ports
  • 4-inch straight connectors simplify internal cable routing
  • Five adapters included for multiple drive installations
  • Male 4-pin to female 15-pin SATA power conversion
  • New condition ensures reliable power delivery

Specifications

BrandManw

Questions about this item

Will the 4-inch cable length reach drives in a full-tower case?

The 4-inch straight connectors suit tight internal routing; measure your drive-to-PSU distance before ordering.

Does the adapter generate noticeable heat when powering drives continuously?

Passive wiring adds no active heat; warmth depends on the drive load and case airflow, not the adapter itself.

Must the power supply already have a free 4-pin Molex LP4 port for this to work?

Yes, the male Molex end plugs into an existing LP4 connector on the PSU to supply the SATA drive.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.