We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
3.3ft SFF-8087 Mini SAS to four right-angle SATA breakout cable

Manw

Manw 3.3ft SFF-8087 Mini SAS to 4 Right Angle SATA Breakout Cable

SKU CH-Q1W6-ER31A

Internal 3.3ft SFF-8087 Mini SAS cable splits into four 90-degree right-angle SATA ports for dense multi-drive server arrays

  • One SFF-8087 Mini SAS splits into four SATA ports for multi-disk arrays
  • 90-degree right-angle SATA connectors fit tight server drive cages and backplane slots
  • 3ft length reaches across large tower and rack-mounted storage chassis
  • Full shielding stops electromagnetic crosstalk for stable high-speed enterprise workloads
  • Plug-and-play Mini SAS to SATA conversion works without extra adapters or drivers

Manw 3.3ft Mini SAS Breakout Cable

This 3.3ft internal cable connects a Mini SAS RAID adapter to four SATA drives or backplanes. It is built for server storage expansion, NAS assembly and multi-disk array construction in enterprise environments. The single SFF-8087 input fans out to four independent right-angle SATA data ports for clean multi-disk deployment.

SATA I II III interface limits

The cable carries the SATA I, II and III signal set, so maximum throughput is defined by the host controller and the attached drives. Cable length and shielding preserve signal integrity at those speeds, but the link cannot exceed the native SATA revision ceiling. No protocol conversion or speed boost is provided by the assembly itself.

Right-angle SATA connectors

Downward 90-degree SATA terminals fit densely stacked drive cages and narrow backplane slots where straight plugs would bind or stress the port. This single mechanical feature decides whether the cable works in a given chassis; if the bay requires straight connectors or a different angle, the part will not install.

Highlights

  • One SFF-8087 Mini SAS splits into four SATA ports for multi-disk arrays
  • 90-degree right-angle SATA connectors fit tight server drive cages and backplane slots
  • 3ft length reaches across large tower and rack-mounted storage chassis
  • Full shielding stops electromagnetic crosstalk for stable high-speed enterprise workloads
  • Plug-and-play Mini SAS to SATA conversion works without extra adapters or drivers

Specifications

BrandManw

Questions about this item

Should I choose the 3.3ft length or a shorter cable for my server build?

The 3.3ft length gives enough slack to route from a Mini SAS controller to drives in a large full-tower or rack chassis without stretching, while the structured branches keep airflow clear.

What real-world throughput does the SFF-8087 Mini SAS link deliver to each SATA drive?

The cable passes the native SATA I, II or III speed of each attached drive; the Mini SAS host sets the aggregate ceiling, but per-port bandwidth matches the drive’s own SATA generation.

Does the SFF-8087 end limit me to a specific SAS or SATA standard?

The SFF-8087 connector carries four SATA lanes and works with any Mini SAS RAID adapter; the right-angle SATA plugs accept SATA I, II and III drives and backplanes without adapters.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.