We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Four silver metal brackets with screw holes to mount 2.5 inch drives in 3.5 inch bays

Manw

Manw 2.5 to 3.5 inch SSD Mounting Bracket HDD Metal Adapter Dock (4PCS)

SKU CH-83MB-GQ988

Four metal brackets convert a 3.5 inch bay to hold a 2.5 inch SATA, IDE or SSD drive with screw holes for secure mounting and heat dissipation

  • Mount 2.5" drives in 3.5" bays using the adapter bracket
  • Metal construction resists distortion and aids heat dissipation
  • Four rear screw holes secure the drive to the bracket
  • Six side screw holes fix the bracket to the chassis
  • Compact 115 x 101 x 13.5 mm size fits standard cases

2.5" to 3.5" Drive Bracket Kit

This four-piece metal bracket set lets builders mount 2.5 inch SATA, IDE or SSD drives into standard 3.5 inch drive bays. It suits desktop PCs, servers or any chassis with a 3.5 inch slot. Each adapter uses four rear screw holes to secure the drive and six side holes to fix the bracket to the case. The pack covers multiple drive swaps or a small RAID array.

Mechanical Interface Limits

The bracket bridges the 2.5 inch drive form factor to a 3.5 inch bay using only screw-hole alignment; it adds no electronic conversion. Data and power still rely on the drive's native SATA connectors reaching the motherboard and PSU cables. The metal shell measures 115 x 101 x 13.5 mm and aids heat dissipation, but it does not change the drive's interface speed or protocol. Cable routing space depends on the host chassis layout.

3.5 Inch Bay Compatibility

The single deciding factor is whether the target system has an available 3.5 inch internal mount with standard screw spacing. Builders using 2.5 inch-only bays, M.2 slots or external enclosures cannot use these adapters. The six side mounting holes follow common 3.5 inch patterns, yet hole-to-hole dimensions are not supplied, so verification against the specific case is required before purchase.

Highlights

  • Mount 2.5" drives in 3.5" bays using the adapter bracket
  • Metal construction resists distortion and aids heat dissipation
  • Four rear screw holes secure the drive to the bracket
  • Six side screw holes fix the bracket to the chassis
  • Compact 115 x 101 x 13.5 mm size fits standard cases

Specifications

BrandManw

Questions about this item

Should I buy the 4-pack or a single bracket if I only have one 2.5" SSD to install?

The listing supplies four identical metal brackets, so you can mount up to four 2.5" SATA or IDE drives in 3.5" bays. Keep the spares for future upgrades or a second system.

Will this adapter affect the speed of my SATA SSD once it is mounted in a desktop 3.5" bay?

The bracket is a passive metal frame with no electronic components, so it does not alter the SATA data rate or add latency; the drive runs at its native speed.

Does the bracket use a standard 3.5" SATA mounting pattern so it fits my PC case?

Yes, the bracket measures 115 x 101 x 13.5 mm and provides six side screw holes that align with standard 3.5" drive bays in desktop chassis and servers.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.