We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Short black figure-8 power cord with angled C8 plug splitting to two C7 sockets

Manw

Manw 0.75 mm Figure 8 Power Cord 0.3 m C8 to 2×C7 Angled

SKU CH-2ZEB-62GJH

A 0.3 m figure-8 extension cord with 0.75 mm conductors splits one C8 inlet into two angled C7 outlets for powering multiple devices

  • Powers two devices from one C8 inlet with 0.3 m angled C7 connectors
  • Supports servers, PDUs, PCs, monitors and laser printers via polarised sockets
  • Extends charger or monitor reach by 0.3 metres for tight spaces
  • 75 mm conductors handle standard mains loads for reliable operation
  • Compact Y-splitter design fits small UPS units or crowded power strips

Versatile power extension

The Manw 0.75 mm Figure 8 cord splits one C8 inlet into two angled C7 outlets, letting you feed two devices from a single socket. It suits home offices, small server racks or AV setups where outlet space is tight and multiple low-power adapters must share one feed.

Angled connectors for tight spaces

The right-angle C7 plugs sit flush against equipment backs, reducing cable strain and keeping rack or desk surfaces tidy. Polarised sockets ensure correct orientation, while the short 0.3 m length avoids excess slack that can block airflow or snag during equipment swaps.

Passive cord with minimal loss

As a simple copper extension it adds no active components, so heat and noise stay at ambient levels. The 0.75 mm conductors handle typical charger, monitor and printer loads without measurable voltage drop, drawing only the power the connected devices require.

Highlights

  • Powers two devices from one C8 inlet with 0.3 m angled C7 connectors
  • Supports servers, PDUs, PCs, monitors and laser printers via polarised sockets
  • Extends charger or monitor reach by 0.3 metres for tight spaces
  • 75 mm conductors handle standard mains loads for reliable operation
  • Compact Y-splitter design fits small UPS units or crowded power strips

Specifications

BrandManw

Questions about this item

What does the 0.75 mm conductor size limit in practice?

The 0.75 mm conductors support standard mains voltage and the typical current rating of a C7/C8 appliance coupler for devices such as monitors, printers and chargers.

What clearance does the angled C7 plug need?

The right-angled C7 connectors sit close to the device body, so allow a few centimetres behind the equipment for the cable to bend without strain.

How do you connect the cord without reversing polarity?

Match the polarised C7 plugs to the C8 inlets — the squared and rounded corners only fit one way, so press each plug in firmly until it clicks.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.