We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black rectangular HDMI splitter box with one input and eight output ports

LUOM

LUOM YME-098 1x8 HDMI Splitter 4K 30Hz video splitter

SKU CH-ZY7T-EYH6R

Distributes one HDMI source to eight displays with 4K 30Hz resolution and 10.2 Gbps bandwidth

  • TypeHDMI Splitters
  • Changer TypeHDMI Switch/Extender
  • Ports8
  • ColorBlack
  • Cable Length5 in.
  • Input Connector1x HDMI female
  • Splits one HDMI source to eight displays simultaneously
  • Supports 4K resolution at 25 and 30 Hz refresh rates
  • Handles 48-bit deep color for extended color space
  • Provides 10.2 Gbps bandwidth for reliable signal transmission
  • Regenerates HDMI signal over cable runs up to 130 ft

1x8 HDMI splitter for multi-display distribution

The LUOM YME-098 takes a single HDMI source and sends identical audio and video to eight HDMI displays at once. It supports resolutions up to 3840 x 2160 at 25 or 30 Hz and handles 48-bit deep colour with 10.2 Gbps bandwidth. Compatible devices include PCs, laptops, streaming sticks, game consoles, projectors and televisions. The unit ships with a power supply adapter included.

Upgrade from a basic 1x2 or 1x4 splitter

If you currently run a two-port or four-port splitter and need to drive more screens in a classroom, conference room or digital-signage wall, this eight-port model removes the need for daisy-chaining extra units. The jump is worth it when you must show the same 4K 30 Hz content on six to eight displays simultaneously without adding latency or signal loss. It also regenerates the signal at the end of a long cable run.

Verify source resolution and cable lengths

Confirm your source device can output 3840 x 2160 at 25 or 30 Hz; higher refresh rates are not supported by this HDMI 1.4 implementation. Check that each HDMI cable run stays within 130 ft using AWG26 standard cable to maintain signal integrity. Ensure all eight displays accept the same resolution and audio format, as the splitter does not downscale or mix signals per port.

Highlights

  • Splits one HDMI source to eight displays simultaneously
  • Supports 4K resolution at 25 and 30 Hz refresh rates
  • Handles 48-bit deep color for extended color space
  • Provides 10.2 Gbps bandwidth for reliable signal transmission
  • Regenerates HDMI signal over cable runs up to 130 ft

Specifications

BrandLUOM
ModelYME-098
TypeHDMI Splitters
Changer TypeHDMI Switch/Extender
Ports8
ColorBlack
Cable Length5 in.
Input Connector1x HDMI female
Output Connector8x HDMI female
Connector StyleStandard
Maximum Resolutions3840 x 2160

Questions about this item

How much space does the 5 in cable need behind the source device?

The attached 5 in cable requires roughly 5 inches of clearance behind the HDMI source so the splitter body can sit without bending the lead.

What is the correct power-up sequence so all eight displays sync at 4K 30Hz?

Connect the power adapter first, then the source to the single HDMI input, then the eight displays to the outputs; powering the source before the splitter often causes handshake loss.

When should the external power adapter be replaced to keep 10.2 Gbps bandwidth stable?

Replace the adapter if the splitter starts dropping 4K 30Hz signals or shows sparkles, since a sagging supply can no longer maintain the 10.2 Gbps link budget.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.