We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Transparent black M.2 NVMe enclosure with USB-C cables

LUOM

LUOM USB 3.1 Gen 2 Type C Tool-Free M.2 SSD Enclosure 2280 2260 2242 2230 NVME (Black)

SKU CH-09N4-YG707

Tool-free USB 3.1 Gen 2 Type-C enclosure holds NVMe M.2 SSDs (2230, 2242, 2260, 2280) with JMS583 controller for up to 10 Gbps and 950+ MB/s

  • Tool-free installation readies an NVMe drive in under three minutes
  • USB 3.1 Gen 2 Type-C delivers up to 10 Gbps transfer speed
  • JMS583 controller with UASP and TRIM sustains 950+ MB/s read and write
  • Fits M.2 2230, 2242, 2260 and 2280 NVMe SSDs up to 2 TB
  • Aluminium plate and thermal pads keep the drive cool during heavy workloads

What this enclosure does

This LUOM adapter lets you connect an M.2 SATA SSD to a USB Type-C port on Windows, Linux or macOS. It accepts 2230, 2242, 2260 and 2280 form factors up to 2TB. The tool-free design means the drive slides in and locks without screws. It is not for NVME or M-key drives.

The interface that matters

The enclosure uses a JMS580 controller over USB 3.1 Gen 1 for a 5 Gbps link. That bandwidth caps sequential transfers well below NVME speeds. Buyers who need 10 Gbps or PCIe performance should choose a different adapter.

Heat and power in use

An aluminium plate, copper bars on the PCB and included thermal pads draw heat away from the drive. The transparent polycarbonate shell lets you see the SSD while it runs. No fan is fitted, so the enclosure stays silent. Power comes entirely from the USB bus.

Highlights

  • Tool-free installation readies an NVMe drive in under three minutes
  • USB 3.1 Gen 2 Type-C delivers up to 10 Gbps transfer speed
  • JMS583 controller with UASP and TRIM sustains 950+ MB/s read and write
  • Fits M.2 2230, 2242, 2260 and 2280 NVMe SSDs up to 2 TB
  • Aluminium plate and thermal pads keep the drive cool during heavy workloads

Specifications

No published specifications for this item yet.

Questions about this item

What does the 10 Gbps figure mean when the enclosure is connected to a real machine?

The 10 Gbps is the USB 3.1 Gen 2 link ceiling; with a compatible NVME SSD the JMS583 controller can sustain read and write speeds above 950 MB/s in practice.

Which interface standard is used and what speed does it cap at?

It uses a USB 3.1 Gen 2 Type-C connection limited to 10 Gbps, driven by the JMS583 bridge that also enables UASP and Trim.

What physical M.2 lengths does the tool-free slot accept?

The enclosure fits 2230, 2242, 2260 and 2280 M-key NVME drives up to 2 TB; SATA or B-key modules are not supported.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.