We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

LUOM

LUOM USB 3.1 Gen 2 Type-C M.2 NVME Enclosure 2230-2280 Silver

SKU CH-K7K5-42529

Tool-free transparent enclosure accepts M.2 SATA SSDs in 2230, 2242, 2260 and 2280 sizes and connects via USB 3.1 Gen 1 Type-C at up to 5 Gbps

  • Tool-free installation fits 2230, 2242, 2260 and 2280 drives
  • Transparent crystal PC shell shows the SSD inside at a glance
  • Aluminium plate and thermal pads keep the drive cool during transfers
  • JMS580 controller with USB 3.1 Gen 1 Type-C delivers up to 5 Gbps
  • Works with Windows, Linux and Mac OS for broad compatibility

Tool-free M.2 enclosure for SATA SSDs

This LUOM enclosure accepts M.2 SATA drives in 2230, 2242, 2260 and 2280 lengths up to 2 TB. A tool-free mechanism lets you install a drive in under three minutes. The transparent housing shows the installed module at a glance. It connects via USB 3.1 Gen 1 Type-C and includes both Type-C and USB-A cables for broad host compatibility with Windows, Linux and macOS.

Aluminium plate and thermal pads for passive cooling

An aluminium alloy plate on one side of the PCB works with copper bars and thermal pads to draw heat away from the drive. The JMS580 controller manages power draw through the USB 3.1 Gen 1 link, which tops out at 5 Gbps. No fan is fitted, so operation stays silent during typical file transfers and backups.

UASP and Trim support with dual cables included

The JMS580 bridge enables UASP and Trim, which help maintain consistent throughput and drive health on supported operating systems. The box supplies a USB Type-C to Type-C cable and a USB-A to Type-C cable, so you can plug into modern or legacy ports without buying extra leads. The enclosure does not support NVME, M-key, M&B-key or mSATA modules.

Highlights

  • Tool-free installation fits 2230, 2242, 2260 and 2280 drives
  • Transparent crystal PC shell shows the SSD inside at a glance
  • Aluminium plate and thermal pads keep the drive cool during transfers
  • JMS580 controller with USB 3.1 Gen 1 Type-C delivers up to 5 Gbps
  • Works with Windows, Linux and Mac OS for broad compatibility

Specifications

No published specifications for this item yet.

Questions about this item

How do I install a 2280 M.2 SATA SSD in the LUOM enclosure and what step do people often miss?

Slide the SSD into the M.2 slot at a slight angle, press it down, and secure it with the tool-free latch; the step often missed is confirming the drive is a B-key SATA model — NVMe M-key drives will not work.

What maintenance will the LUOM enclosure need over time?

The thermal pads on the aluminium plate and the copper bars on the PCB should be inspected periodically; if they become brittle or lose contact, replace them to keep the 2230-2280 drive cool.

What is the first performance limit I will hit during sustained transfers with this enclosure?

The USB 3.1 Gen 1 interface caps sustained throughput at 5 Gbps, so even a fast SATA SSD will hit that ceiling before the JMS580 controller or thermal limits become a factor.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.