We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black USB 3.0 to SATA 22-pin adapter cable with 12V 2A power brick

LUOM

LUOM USB 3.0 to SATA 22-pin Adapter Cable with 12V 2A Power

SKU CH-7CJH-EB9DR

Connects 2.5 or 3.5 inch SATA drives via USB 3.0 with UASP for faster transfers and includes a 12V 2A power adapter for 3.5 inch drives

  • Connect 2.5" or 3.5" Sata drives via USB 3.0
  • Achieve up to 70% faster reads with UASP support
  • Includes 12V 2A power for 3.5" drive operation
  • Plug-and-play drive swaps without enclosure installation
  • Portable adapter fits in a laptop bag for travel

Portable SATA drive adapter for laptop users

This LUOM adapter connects a 2.5" or 3.5" SATA SSD or HDD to a USB 3.0 port on a laptop. It enables quick access for adding storage, creating backups, performing data recovery or transferring files between drives. The plug-and-play design requires no driver installation and allows easy swapping of drives without an enclosure.

Low-power operation with optional 12V supply

The adapter draws power from the USB port for 2.5" drives, keeping cable clutter minimal during mobile use. A 12V 2A power adapter is included and becomes necessary when a 3.5" SATA HDD is connected. No active cooling is present, so the unit runs silently in normal operation.

UASP support and bundled power adapter

When the host system supports UASP, the adapter can deliver up to 70% faster read speeds and 40% faster write speeds compared to standard USB 3.0. The included 12V 2A power brick expands compatibility to 3.5" drives, while the 22-pin SATA connector handles both data and power for 2.5" devices.

Highlights

  • Connect 2.5" or 3.5" Sata drives via USB 3.0
  • Achieve up to 70% faster reads with UASP support
  • Includes 12V 2A power for 3.5" drive operation
  • Plug-and-play drive swaps without enclosure installation
  • Portable adapter fits in a laptop bag for travel

Specifications

No published specifications for this item yet.

Questions about this item

How do I install the LUOM USB 3.0 to SATA 22-pin adapter and what step do people often miss?

Connect the 22-pin SATA plug to your 2.5 or 3.5 inch drive, plug the USB 3.0 end into the computer, and attach the 12V 2A power adapter — the step many skip is powering the adapter before connecting a 3.5 inch HDD, which will not spin up without it.

What maintenance or replacement will this adapter need over time?

The cable and 12V 2A power supply are the only parts that can wear out; inspect the 22-pin connector and DC jack for bent pins or loose fit, and replace the power brick if the 3.5 inch drive stops spinning reliably.

What limit appears first during sustained transfers with this adapter?

The USB 3.0 5Gbps interface caps throughput; with UASP enabled you can see up to 70 percent faster reads and 40 percent faster writes, but the bus ceiling remains the first bottleneck under continuous load.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.