LUOM
LUOM T0303 DisplayPort 1.4 Cable 10 ft 8K@60Hz 4K@144Hz 32.4Gbps
A 10 ft DisplayPort 1.4 cable with double shielding and solid copper conductors, supporting 8K at 60 Hz and 4K at 144 Hz for gaming and video
- TypeDisplayPort Cable
- ColorBlack
- Length10 ft.
- Cable Length10 ft.
- Connector Number1
- Connect From1 x DisplayPort 1.4
- Supports 8K at 60 Hz with 7680×4320 resolution
- Delivers 4K at 144 Hz for smooth high-refresh gaming
- 4 Gbps bandwidth enables lossless HDR 4:4:4 colour
- Double-shielded solid copper conductors ensure stable signal transmission
- 24 K gold-plated male-to-male connectors resist oxidation and wear
10 ft DisplayPort 1.4 cable for 8K
This 10 ft DisplayPort 1.4 male-to-male cable carries 8K resolution at 60 Hz and 4K at 144 Hz over a double-shielded solid-copper conductor. Gold-plated connectors resist oxidation and ensure a secure fit. Plug-and-play operation requires no drivers. It suits PC, laptop, monitor, projector or TV connections.
Not for longer runs or legacy DisplayPort versions
The fixed 10 ft length limits setups that need more reach or a shorter tail for tight cable management. Systems equipped only with DisplayPort 1.2 or older ports cannot reach the advertised 8K or 4K 144 Hz ceilings. Buyers who need in-wall ratings, active signal boosting or a different connector type should consider other cable designs.
32.4 Gbps bandwidth enables the stated resolutions
The cable is rated for 32.4 Gbps throughput, the single figure that determines whether 8K 60 Hz, 4K 144 Hz or 2K 165 Hz can be transmitted without compression. Both source and display must support the target resolution and refresh rate for the link to operate at those levels.
Highlights
- Supports 8K at 60 Hz with 7680×4320 resolution
- Delivers 4K at 144 Hz for smooth high-refresh gaming
- 4 Gbps bandwidth enables lossless HDR 4:4:4 colour
- Double-shielded solid copper conductors ensure stable signal transmission
- 24 K gold-plated male-to-male connectors resist oxidation and wear
Specifications
| Brand | LUOM |
|---|---|
| Model | T0303 |
| Type | DisplayPort Cable |
| Color | Black |
| Length | 10 ft. |
| Cable Length | 10 ft. |
| Connector Number | 1 |
| Connect From | 1 x DisplayPort 1.4 |
| Connect To | 1 x DisplayPort 1.4 |
| Terminal Gender | Male to Male |
| Speed | Test |
| Shielding | Double-shielded |
| Conductor | Solid Copper Conductor |
| Construction | test123 |
| Sound Quality | Production Test |
Other versions of this model
5 more in the same range
Same family, different memory, cooler or clock — compare before you commit.
LUOM TJ-A033 DisplayPort 1.4 Cable 6.6 ft 32.4 Gbps 8K@60Hz HDR HDCP 2.2
- DisplayPort Cable
- Black
LUOM TJ-A033 DisplayPort 1.4 Cable 10 ft 32.4 Gbps 8K@60Hz
- DisplayPort Cable
- Black
LUOM T0303 DisplayPort Cable 10ft 8K 60Hz 4K 144Hz 32.4Gbps
- DisplayPort Cable
- Black
LUOM T0303 DisplayPort cable 10 ft 1.4 8K 7680x4320 60Hz 4K 144Hz 2K 165Hz 24K gold double-shielded copper
- DisplayPort Cable
- Black
Questions about this item
Is the 10 ft length suitable for my desk setup or do I need a shorter cable?
The cable is 10 ft long. Measure the distance from your graphics card to the monitor along the routing path. Add slack for bends and cable management. If the run is shorter than 10 ft, the extra length can be coiled.
Will 32.4 Gbps bandwidth actually deliver 8K at 60 Hz on my hardware?
The cable supports 32.4 Gbps bandwidth per the DisplayPort 1.4 specification. To achieve 7680 x 4320 at 60 Hz both the source GPU and the display must support that mode. The cable itself does not limit the link.
Does the DisplayPort 1.4 interface limit me to 4K at 144 Hz or can it go higher?
DisplayPort 1.4 caps at 32.4 Gbps. That bandwidth allows 3840 x 2160 at 144 Hz and 7680 x 4320 at 60 Hz. Higher refresh rates at 8K or 4K beyond 144 Hz would exceed the link capacity.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.








