We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
LUOM SATA to USB 3.0 and Type-C adapter cable with DC jack

LUOM

LUOM SATA to USB 3.0 & Type-C Hard Drive Adapter (FXHU.00111FX01002)

SKU CH-ZTNE-43CPF

Connects 2.5" or 3.5" SATA drives via USB 3.0 and Type-C with UASP support for faster transfers

  • Connect 2.5″ or 3.5″ SATA drives via USB Type-C or USB 3.0
  • Transfer data at up to 5 Gbps with USB 3.0 speeds
  • UASP protocol cuts CPU load and latency by 70 %
  • Works with Windows 98 through 10 and Mac OS X, no drivers needed
  • 5″ drives supported with a 12 V DC power adapter

USB-C and USB 3.0 SATA adapter for 2.5

This LUOM adapter connects any 2.5" or 3.5" SATA hard drive or SSD to a computer through a USB Type-C or USB 3.0 port. It enables external storage access for data migration, drive cloning, backups and laptop drive upgrades. The cable supports the UASP protocol to improve transmission efficiency. No drivers are required for operation.

Suits users adding external SATA storage to USB-C

The adapter works with laptops, desktops, tablets, phones, smart TVs, routers and Blu-ray players running Windows or Mac OS. A 12V power adapter is necessary to run 3.5" drives, while 2.5" drives draw power from the USB port. Buyers who need to connect drives that do not use the SATA interface cannot use this adapter.

Transfer speed reaches 5 Gbps on USB 3.0

The hardware is compliant with the SATA standard and fully compatible with USB 3.0, while remaining backward compatible with USB 2.0 and 1.1. Actual throughput depends on the capability of the connected drive. The Type-C connector allows the higher 10 Gbps rate on supporting hosts.

Highlights

  • Connect 2.5″ or 3.5″ SATA drives via USB Type-C or USB 3.0
  • Transfer data at up to 5 Gbps with USB 3.0 speeds
  • UASP protocol cuts CPU load and latency by 70 %
  • Works with Windows 98 through 10 and Mac OS X, no drivers needed
  • 5″ drives supported with a 12 V DC power adapter

Specifications

No published specifications for this item yet.

Questions about this item

What cables and power items come with the LUOM FXHU.00111FX01002 adapter, and what must I supply myself?

The adapter cable provides USB 3.0 and USB Type‑C connectors for the host and a SATA data plus power connector for the drive. A 12V power adapter for 3.5″ drives is not included; 2.5″ drives draw power from the USB port.

Should I use the USB 3.0 or the Type‑C connection on the LUOM FXHU.00111FX01002 for the fastest transfer?

Both host connectors are wired to the same USB 3.0 controller, so the maximum link speed is 5Gbps whichever plug you use. Choose the port that matches your computer.

How does the 70% UASP efficiency gain translate to real‑world copy speeds on the LUOM FXHU.00111FX01002?

UASP lowers CPU overhead and command latency, so sustained reads and writes stay closer to the drive's own SATA limit instead of stalling on the USB protocol.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.