We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black SATA to USB 3.0 adapter cable with 22 pin connector and 12V 2A power brick

LUOM

LUOM SATA to USB 3.0 Adapter with 12V 2A Power, 22 Pin Cable for 2.5 & 3.5 inch HDD SSD

SKU CH-XT6P-404JF

Connects 2.5 and 3.5 inch SATA drives to USB 3.0 with included 12V 2A power, supporting UASP for up to 70% faster reads and 40% faster writes

  • Connect 2.5 or 3.5 inch SATA drives to USB 3.0
  • Transfer data at up to 5Gbps with UASP support
  • Includes 12V 2A power for 3.5 inch drives
  • Plug and play with no driver installation needed
  • Read speeds up to 70% faster and write speeds up to 40% faster with UASP

Connect 2.5 and 3.5 SATA drives via USB

The LUOM adapter lets you attach a 2.5 inch or 3.5 inch SATA SSD or HDD to a laptop or desktop through a USB 3.0 port. It is built for quick data recovery, backup, disk imaging or adding temporary storage without opening the computer case. A 22 pin cable and a 12V 2A power supply are included so both drive sizes receive adequate power. Plug and play operation means no driver installation is required on supported systems.

Check USB port and UASP support before ordering

Verify that your computer has a USB 3.0 port to reach the 5Gbps link speed. UASP acceleration works on Windows 8, Mac OS X 10.8 or later, and Linux; older operating systems will fall back to standard USB 3.0 performance. The 12V 2A power adapter must be connected whenever a 3.5 inch drive is used, so ensure a mains socket is available. No internal drive bay or enclosure is needed for the adapter itself.

Thermals noise and power draw in normal use

The adapter draws power from the USB port for 2.5 inch drives and from the supplied 12V 2A unit for 3.5 inch drives, keeping consumption low. No fan is present so operation is silent during transfers. The plastic housing stays cool to the touch under typical workloads because the circuitry only bridges the SATA and USB interfaces. Power delivery is limited to the rated 2A, so very high current drives are not supported.

Highlights

  • Connect 2.5 or 3.5 inch SATA drives to USB 3.0
  • Transfer data at up to 5Gbps with UASP support
  • Includes 12V 2A power for 3.5 inch drives
  • Plug and play with no driver installation needed
  • Read speeds up to 70% faster and write speeds up to 40% faster with UASP

Specifications

No published specifications for this item yet.

Questions about this item

What cables and power supply come in the box, and do I need anything extra?

The package includes a 22-pin SATA to USB 3.0 cable and a 12V 2A power adapter. The power adapter is required for 3.5-inch drives; 2.5-inch drives can run from the USB port alone.

Should I choose this adapter for a 2.5-inch or a 3.5-inch SATA drive?

It works with both 2.5-inch and 3.5-inch SATA SSDs or HDDs. Use the included 12V 2A power adapter when connecting a 3.5-inch drive; a 2.5-inch drive can be powered directly from the USB 3.0 port.

What does the 5 Gbps USB 3.0 rating mean for actual copy speeds?

The adapter supports USB 3.0 at 5 Gbps. On a host that also supports UASP you can see up to 70% faster reads and 40% faster writes compared with standard USB 3.0, letting a SATA III drive reach its full potential.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.