We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Red transparent enclosure with aluminium plate and USB-C cable

LUOM

LUOM M.2 NVME PCIe to USB 3.1 Gen 2 Type-C 10 Gbps Enclosure Red

SKU CH-DZXM-CE50H

Encloses M-key NVMe SSDs up to 2 TB with tool-free assembly and 10 Gbps USB 3.1 Gen 2 Type-C speed

  • Tool-free installation in under three minutes
  • Transparent case lets you see the drive inside
  • Aluminium plate with thermal pads keeps temperatures down
  • USB 3.1 Gen 2 Type-C reaches 10 Gbps with JMS583 controller
  • Works with 2230, 2242, 2260 and 2280 NVME M-Key SSDs up to 2 TB

Transparent NVMe Enclosure

The LUOM M.2 NVMe PCIe to USB 3.1 Gen 2 Type-C enclosure connects PCIe-based NVMe M-Key SSDs in 2230, 2242, 2260 and 2280 form factors up to 2 TB. A tool-free design lets you install a drive in under three minutes. The transparent crystal PC shell shows the drive inside, while an aluminium alloy plate and thermal pads draw heat away. It works with Windows, Linux and macOS and includes both USB-C to USB-C and USB-A to USB-C cables.

JMS583 Controller Performance

The JMS583 master controller supports UASP and TRIM over a USB 3.1 Gen 2 Type-C link rated at 10 Gbps. Compatible NVMe SSDs can reach sequential read and write speeds above 950 MB/s under sustained load. The aluminium plate and copper-bar thermal design helps maintain these speeds during extended transfers. Note that the enclosure does not support SATA-based M.2 drives, M.2 PCIe AHCI SSDs or mSATA modules.

Pre-Purchase Checklist

Verify your M.2 SSD uses the NVMe protocol with an M-Key notch; B-Key or M+B-Key SATA drives will not function. Confirm your host device provides a USB-C or USB-A port capable of USB 3.1 Gen 1 or Gen 2 bandwidth for best performance. Ensure the drive length matches one of the supported sizes: 2230, 2242, 2260 or 2280. The enclosure is limited to a maximum capacity of 2 TB.

Highlights

  • Tool-free installation in under three minutes
  • Transparent case lets you see the drive inside
  • Aluminium plate with thermal pads keeps temperatures down
  • USB 3.1 Gen 2 Type-C reaches 10 Gbps with JMS583 controller
  • Works with 2230, 2242, 2260 and 2280 NVME M-Key SSDs up to 2 TB

Specifications

No published specifications for this item yet.

Questions about this item

Does the JMS583 controller and USB 3.1 Gen 2 connection generate noticeable heat during continuous all-day transfers?

The aluminium alloy plate and thermal pads on the PCBA board are designed to dissipate heat from the JMS583 controller during sustained use.

What host port and cable must I already have to reach the 10 Gbps link speed?

A USB 3.1 Gen 2 Type-C port on the host and the included Type-C to Type-C cable are required for 10 Gbps operation.

Will a legacy SATA-based M.2 drive (B-Key) work in this NVMe-only enclosure?

No — the enclosure supports only NVMe PCIe M-Key drives in sizes 2230, 2242, 2260 and 2280 up to 2 TB.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.