We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Small black box with HDMI port on one side and five colour-coded RCA sockets plus power jack on the other

LUOM

LUOM HDMI to YPbPr 5RCA Audio Video Converter 1080p 60Hz

SKU CH-F0YX-57KA2

Converts HDMI input to YPbPr video with stereo audio for 1080p 60Hz displays

  • TypeHDMI to YPbPr 5RCA RGB Adapter
  • Connector A1x HDMI
  • Connector B1 x YPbPr 5RCA
  • AudioYes
  • Package Contents1 x HDMI to Component Converter 1 x 5V DC Power Supply 1 x U
  • Converts HDMI to analog YPbPr video and stereo audio for legacy displays
  • Supports 1080p at 60 Hz pass-through with HDCP 1.2 compliance
  • Accepts 480p, 576p, 720p and 1080i/p input resolutions without scaling
  • Includes 5 V power supply for stable conversion and plug-and-play setup
  • One-way HDMI to Component only — cannot be used in reverse

HDMI to YPbPr Converter for Legacy Displays

This LUOM adapter converts a digital HDMI signal into analogue YPbPr component video with stereo R/L audio. It targets users connecting modern sources such as PS3, PS4, TV sticks or DVD players to older televisions, monitors or projectors that only accept component inputs. The unit passes the input resolution through without scaling.

Passive Operation with External 5 V Supply

The converter draws power from the included 5 V DC adapter and adds no active cooling, so it runs silently. Power consumption is low enough for the supplied brick, and no driver installation is required on the source device. HDCP 1.2 content at 1080p 60 Hz is supported.

Bundled Power Supply and Manual Enable Immediate Use

The package provides a 5 V DC power supply and a user manual, removing the need to source a separate adapter. Plug the HDMI source, connect the five RCA cables to the display, attach the power supply and the converter is operational. No software or firmware updates are involved.

Highlights

  • Converts HDMI to analog YPbPr video and stereo audio for legacy displays
  • Supports 1080p at 60 Hz pass-through with HDCP 1.2 compliance
  • Accepts 480p, 576p, 720p and 1080i/p input resolutions without scaling
  • Includes 5 V power supply for stable conversion and plug-and-play setup
  • One-way HDMI to Component only — cannot be used in reverse

Specifications

TypeHDMI to YPbPr 5RCA RGB Adapter
Connector A1x HDMI
Connector B1 x YPbPr 5RCA
AudioYes
Package Contents1 x HDMI to Component Converter
1 x 5V DC Power Supply
1 x User Manual

Questions about this item

How do I connect the 5V DC power supply when installing this HDMI to YPbPr converter?

Plug the included 5V DC adapter into the converter's power port, then connect the HDMI source to the input and the five RCA cables to the YPbPr display; the step often missed is powering the unit before the HDMI handshake completes.

Will the 5V DC power adapter need replacement after extended use?

The external 5V DC supply is the only component that may wear out; if the converter loses sync or the LED dims, swap the adapter for another 5V unit with the same barrel polarity.

What is the highest refresh rate this converter passes through at 1080p without scaling?

It passes 1080p at 60Hz exactly as received, with no scaling, so sustained 1080p60 sources are the practical ceiling before frame-rate conversion would be required.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.