LUOM
LUOM HDMI Male to Female 90° & 270° Angle Adapter 4K 2.0
Routes HDMI cables at 90° or 270° angles in tight spaces while supporting 4K 2.0 video up to 4096×2160, 48-bit colour and 7.1 audio with ARC
- TypeHDMI Converters
- Fits tight spaces with 90° and 270° angled connectors
- Supports 4K 2.0 video up to 4096x2160 resolution
- Carries 32-channel audio including 5.1 and 7.1 surround sound
- Delivers 48-bit colour depth for vibrant HDR visuals
- Reduces port strain on wall-mounted TVs and ceiling projectors
Tight-Space HDMI Angle Adapter
This HDMI male-to-female adapter provides both 90° and 270° orientations so a cable can run up or down from a port with almost no rear clearance. It suits wall-mounted TVs, ceiling projectors or media sticks where a straight connector would hit the mount or wall. The compact elbow extends less than an inch from the socket. It is aimed at installers and home users who need a low-profile connection in confined spaces.
Signal Integrity at 4K 2.0
The adapter is rated for HDMI 2.0 bandwidth and carries resolutions up to 4096×2160 and 3840×2160 as well as 2560×1600, 2560×1440, 1920×1200 and 1080p. It passes Audio Return Channel and HDMI Ethernet Channel signals without extra cables. Colour depth reaches 48-bit and audio supports 32 channels including 5.1 and 7.1 surround formats. HDCP compliance allows protected content to play normally.
Port-Saver Build for Daily Use
Gold-plated contacts and a moulded strain-relief body reduce wear on the device HDMI port from repeated cable insertion. The combo pack supplies both angles so the cable can be routed upward or downward depending on the equipment layout. A lightweight frame adds minimal leverage on the socket. It is not suited for runs that require an in-line coupler or gender change beyond the single male-to-female step.
Highlights
- Fits tight spaces with 90° and 270° angled connectors
- Supports 4K 2.0 video up to 4096x2160 resolution
- Carries 32-channel audio including 5.1 and 7.1 surround sound
- Delivers 48-bit colour depth for vibrant HDR visuals
- Reduces port strain on wall-mounted TVs and ceiling projectors
Specifications
| Type | HDMI Converters |
|---|
Questions about this item
How do I fit the 90° or 270° adapter onto a recessed HDMI 2.0 port without bending the cable?
Plug the male end straight into the port, then rotate the adapter so the female socket points up, down, left or right — whichever gives the cable a flat exit. The elbow adds less than one inch of depth, so the cable clears the wall or mount without a sharp bend.
Will the gold-plated contacts or the ARC channel degrade after repeated plugging cycles?
The adapter is a passive metal-shell coupler with no active electronics; the gold plating resists oxidation and the ARC/HEC pins are wired straight through. Normal insertions do not wear out the connection, so no scheduled replacement is needed.
At what resolution or refresh rate does the 48-bit colour signal first become unstable on a long cable run?
The adapter itself is rated for 4K at 3840×2160 and 4096×2160 with 48-bit colour and 32-channel audio. Any instability comes from the cable length or source device, not from the adapter, because it adds no active circuitry or signal regeneration.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



