LUOM TJ-A033 DisplayPort Cable 10ft 8K@60Hz 4K@144Hz 2K@240Hz HBR3 32.4Gbps
- DisplayPort Cable
- Black
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
LUOM
A 3.3 ft braided DisplayPort 1.4 cable carrying 32.4 Gbps for 8K at 60 Hz, 4K at 144 Hz and 2K at 240 Hz with HDR, FreeSync and G‑Sync support
This LUOM DP28 cable carries a DisplayPort 1.4 signal over 3.3 ft with a rated bandwidth of 32.4 Gbps. It is built for users who need a single male-to-male link between a GPU and a high-refresh monitor or TV. The 28AWG tinned-copper conductors meet VESA HBR3 certification and support DSC 1.2 visually lossless compression.
The jump is worth it when your source and display both support 8K at 60 Hz or 4K at 144 Hz and your existing cable is limited to HBR2 bandwidth. Backward compatibility with DisplayPort 1.3, 1.2 and 1.1 means the cable works with legacy gear, but the 32.4 Gbps ceiling only unlocks on HBR3-capable ports.
The 32.4 Gbps ceiling caps uncompressed 8K to 60 Hz and 4K to 144 Hz; higher refresh rates at those resolutions require DSC compression. Cable length beyond the specified 3.3 ft can reduce signal integrity, and the link cannot exceed the HBR3 data rate even if future GPUs or monitors support faster standards.
| Brand | LUOM |
|---|---|
| Model | DP28 |
| Type | DisplayPort |
| Color | Black |
| Connector Number | 1 |
| Connect From | 1 x DisplayPort 1.4 |
| Connect To | 1 x DisplayPort 1.4 |
| Connector Detail | DisplayPort to DisplayPort( Male to Male) |
| Terminal Gender | Male to Male |
| Speed | Supports up to 32.4Gbps bandwidth. |
| Specifications | Bandwidth: 32.4Gbps Refresh Rate: 8K@60Hz, 5K@60Hz, 4K@144Hz, 4K@60Hz, 2K@240Hz, 2K@165Hz HDCP 2.2, HDCP 1.4, HDR.. Backward compatible with DisplayPort 1.3/1.2. Dynamic HDR, Multi-Screen Display Conductor Material : 28AWG Tinned Copper Supports BT601, BT709, BT2020, Adobe RGB Color Format |
| Refresh Rate | 8K@60Hz, 5K@60Hz, 4K@144Hz, 4K@60Hz, 2K@240Hz, 2K@165Hz |
| Features | 8K DisplayPort Cable 1.4 4K 144Hz 2K 240Hz About Brand Silkland: [Officially Certified VESA Member] Supports 8K@60Hz, 2K@240Hz, 4K@144Hz, 4K@60Hz, 5K@60Hz, 2K@165Hz, 1080P@240Hz, HDCP 2.2/1.4 and HDR HBR3 Rated, supports transmission speed up to 32.4Gbps Display Stream Compression 1.2(DSC), FEC forward error correction, and 32 audio channels HBR3 rated - Backward compatible with DisplayPort 1.3/1.2/1.1 |
Other versions of this model
Same family, different memory, cooler or clock — compare before you commit.
The LUOM DP28 cable uses a standard full-size DisplayPort 1.4 male connector on each end, so it fits any GPU or monitor with a full-size DisplayPort input.
Align the wide side of the connector, push straight in until the latch clicks, and to remove it press the latch release button before pulling — never yank the cable body.
The 28 AWG tinned-copper conductors and braided jacket are built for stable 32.4 Gbps transmission; no periodic replacement is needed unless the cable is physically damaged.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
Same shelf, same checkout — eight coins and a 30-minute rate lock.
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
Pick the language the site speaks to you in.
No language matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?