We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Compact black DAC box with volume knob, optical, USB and Bluetooth 5.0 inputs, RCA and 3.5mm outputs, remote included

LUOM

LUOM 192kHz DAC Audio Video Converter Bluetooth 5.0

SKU CH-9P55-HYSJ1

Converts Bluetooth 5.0, optical and USB digital audio to analogue stereo with 192 kHz DAC, 125 mW headphone amp and remote control

  • TypeSDI to HDMI Converter
  • Connector A1 x SDI input
  • Connector B1 x SDI output, 1 x HDMI output
  • Package ContentsSDI to HDMI Converter * 1 USB Charge Cable * 1 Power Adapter
  • Converts optical, USB and Bluetooth 5.0 audio to analogue stereo for any amplifier
  • Plays lossless MP3, WAV, APE, FLAC and WMA files directly from a USB flash drive
  • High-performance DAC chip handles 192 kHz / 24-bit sampling for detailed playback
  • Headphone amplifier delivers 125 mW per channel into 32 Ω loads
  • Volume knob and remote give instant level control without reaching for the amp

LUOM 192kHz DAC Converter

The LUOM converter turns optical Toslink, USB flash-drive and Bluetooth 5.0 sources into analogue stereo through RCA and 3.5 mm outputs. It suits anyone who wants to connect a TV, games console or phone to an older amplifier or powered speakers without digital inputs.

Aluminium chassis with remote and volume knob

The compact metal case feels solid on a shelf and the supplied infrared remote lets you adjust volume or switch inputs from the sofa. RCA sockets accept standard phono cables while the 3.5 mm jack doubles as a headphone output driven at 125 mW into 32 ohms with a 16 to 300 ohm load range.

Check your sources and files before ordering

Your TV or player must send PCM or LPCM over optical at 32, 44.1, 48, 96 or 192 kHz; compressed formats such as Dolby or DTS will not decode. USB flash drives need FAT32 formatting and files in MP3, WAV, APE, FLAC or WMA lossless. Bluetooth 5.0 pairing works with phones and tablets but aptX or LDAC are not supported.

Highlights

  • Converts optical, USB and Bluetooth 5.0 audio to analogue stereo for any amplifier
  • Plays lossless MP3, WAV, APE, FLAC and WMA files directly from a USB flash drive
  • High-performance DAC chip handles 192 kHz / 24-bit sampling for detailed playback
  • Headphone amplifier delivers 125 mW per channel into 32 Ω loads
  • Volume knob and remote give instant level control without reaching for the amp

Specifications

TypeSDI to HDMI Converter
Connector A1 x SDI input
Connector B1 x SDI output, 1 x HDMI output
Package ContentsSDI to HDMI Converter * 1
USB Charge Cable * 1
Power Adapter * 1
User Manual * 1

Questions about this item

What sampling rates does the Toslink input on the LUOM 192kHz DAC Audio Video Converter Bluetooth 5.0 support?

The optical input accepts PCM and LPCM at 32, 44.1, 48, 96 and 192 kHz.

Which headphones can I plug directly into the 3.5 mm jack on this converter?

Models rated 16 to 300 ohms are recommended; the built-in amplifier delivers 125 mW per channel into 32 ohms.

How do I switch the LUOM 192kHz DAC Audio Video Converter Bluetooth 5.0 between Bluetooth, Toslink and USB flash-drive sources?

Use the supplied remote control to select the active input; a common mistake is leaving the previous source playing while changing modes.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.