We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Compact black DAC box with RCA, 3.5mm, Toslink and USB ports, Bluetooth 5.0 antenna visible

LUOM

LUOM 192kHz Bluetooth 5.0 DAC Audio Video Converter

SKU CH-0CAS-4GXZ9

Converts optical, USB and Bluetooth 5.0 digital audio to analogue stereo via RCA and 3.5mm jack at up to 192 kHz 24-bit with 125 mW headphone amplification

  • TypeSDI to HDMI Converter
  • Connector A1 x SDI input
  • Connector B1 x SDI output, 1 x HDMI output
  • Package ContentsSDI to HDMI Converter * 1 USB Charge Cable * 1 Power Adapter
  • Plays lossless files from USB drives directly
  • Streams audio wirelessly via Bluetooth 5.0 receiver
  • Converts digital optical signals to analog stereo
  • Drives headphones up to 300 ohm with 125mW power
  • Supports sampling rates up to 192kHz 24bit

Versatile Digital-to-Analogue Converter

The LUOM unit accepts Bluetooth 5.0, Toslink and USB sources, converting them to stereo analogue output through RCA and 3.5 mm jacks. It serves anyone who needs to connect modern digital sources to a traditional amplifier or powered speakers. A USB flash drive can also be played directly, supporting MP3, WAV, APE, FLAC and WMA lossless files.

Silent Operation With Headphone Amplifier

The device has no moving parts, so it runs completely silent and draws minimal power from the included adapter. Its built-in headphone amplifier delivers 125 mW per channel into 32 Ω loads and supports headphones from 16 to 300 Ω. Optical and coaxial inputs handle PCM and LPCM at sampling rates of 32, 44.1, 48, 96 and 192 kHz.

Simple Integration Into Existing Systems

Connect the converter between a TV, streamer or computer and an analogue amplifier using the supplied Toslink or USB cables. The RCA outputs feed a stereo amp while the 3.5 mm jack drives headphones directly. A remote control is included for volume and source selection, freeing the listener from front-panel buttons.

Highlights

  • Plays lossless files from USB drives directly
  • Streams audio wirelessly via Bluetooth 5.0 receiver
  • Converts digital optical signals to analog stereo
  • Drives headphones up to 300 ohm with 125mW power
  • Supports sampling rates up to 192kHz 24bit

Specifications

TypeSDI to HDMI Converter
Connector A1 x SDI input
Connector B1 x SDI output, 1 x HDMI output
Package ContentsSDI to HDMI Converter * 1
USB Charge Cable * 1
Power Adapter * 1
User Manual * 1

Questions about this item

How do I connect the LUOM DAC to my amplifier using the optical input?

Plug a Toslink cable from your source into the optical port, set the source to output PCM or LPCM at 32, 44.1, 48, 96 or 192KHz, then connect the RCA L/R or 3.5mm jack to the amplifier.

Will the headphone amplifier need servicing or tube replacement over time?

The unit uses a solid-state headphone amp rated at 125mW x2 into 32ohm with a 16-300ohm load range; no tubes or user-serviceable parts are inside.

At what sample rate does the optical input stop accepting a signal during long playback sessions?

The optical input accepts PCM/LPCM up to 192KHz/24bit continuously; no lower limit is imposed by the converter itself.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.