We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Lovejoy L095 jaw coupling hub, carbon steel, 24 mm bore, 54 mm OD, 64 mm long

Lovejoy

Lovejoy L095 24 mm jaw coupling hub

SKU CH-72BM-94CRD

A 24 mm bore jaw coupling hub rated to 9,000 RPM with 54 mm outside diameter and 64 mm overall length

  • 24 mm bore fits standard metric shafts
  • Carbon-steel hub rated for 9,000 RPM maximum speed
  • Set-screw locking secures hub to shaft reliably
  • Compatible with Buna-N, urethane or Hytrel spider elements
  • 54 mm OD and 64 mm length suit L095 coupling size

L095 Jaw Coupling Hub 24 mm Bore

This Lovejoy L095 hub fits a 24 mm round shaft with an 8 mm keyway and 3.3 mm keyway depth. Carbon steel construction and a straight jaw profile handle up to 9,000 RPM. Set screw locking secures the hub to the shaft for general power transmission duties.

Replaces worn L095 hubs

Swap this hub when an existing L095 shows keyway wear or when moving to a 24 mm shaft diameter. The jump is worth it when torque demands match the 0.31 hp Buna-N, 0.47 hp urethane or 0.89 hp Hytrel ratings at 100 RPM and the 54 mm outside diameter fits the envelope.

Slides onto the shaft and locks with the set screw

Align the key in the 8 mm keyway, tighten the set screw over the key, then insert the compatible L095H, L095N or L095U spider element. Misaligned shafts or an undersized key are the usual causes of vibration and premature spider wear.

Highlights

  • 24 mm bore fits standard metric shafts
  • Carbon-steel hub rated for 9,000 RPM maximum speed
  • Set-screw locking secures hub to shaft reliably
  • Compatible with Buna-N, urethane or Hytrel spider elements
  • 54 mm OD and 64 mm length suit L095 coupling size

Specifications

No published specifications for this item yet.

Questions about this item

What shaft diameter does the 24 mm bore of this L095 hub accept?

The hub is machined for a 24 mm round bore with an 8 mm wide by 3.3 mm deep keyway, so it fits a 24 mm shaft with a matching key.

How is the hub secured to the shaft and what step is often missed?

Two set screws lock the hub; the common mistake is not tightening both screws onto the keyway flats, which allows the hub to walk under vibration.

Which centre element part numbers can be used with this hub when the spider wears out?

The hub is compatible with centre elements L095H, L095N and L095U, so any of those three spiders can be swapped in when replacement is needed.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.