We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Round zinc-alloy panel-mount adapter with USB-C and USB 3.0 ports, threaded M24×1.5 nut and protective caps

LORDWORLD

LORDWORLD USB C to USB 3.0 Panel Mount Connector M24×1.5 5Gbps

SKU CH-9PQR-CDDK6

Panel-mount adapter converts a USB 3.0 port to USB-C with a threaded M24×1.5 nut, 5 Gbps throughput, zinc-alloy housing and waterproof dust caps for dashboards or equipment panels

  • Converts USB 3.0 to USB-C for modern device connectivity
  • M24×1.5 threaded nut secures panel mount in a 25mm cutout
  • Up to 5Gbps transfer speed with USB 2.0 backward compatibility
  • Waterproof and dustproof cap protects the port from contaminants
  • Zinc alloy shell withstands harsh industrial environments

Panel-mount USB-C adapter

This connector provides a USB Type-C female port on the front side and a USB 3.0 female port on the rear, allowing a USB 3.0 input to be presented as a USB-C output. It is built for integrators and device builders who need to extend a USB-C connection through a dashboard, desktop surface or equipment panel. The zinc-alloy shell and included M24×1.5 nut secure the unit in a 25mm cut-out. A waterproof dust cap protects the port when it is not in use.

Upgrade from fixed USB-A panel ports

The adapter replaces a standard USB 3.0 panel jack with a USB-C interface, so newer cables and devices can connect directly without a separate dongle. The change is worthwhile when the host system already has a USB 3.0 header or bulkhead and the front-facing port must accept USB-C plugs. It retains backwards compatibility with USB 2.0 devices, so legacy peripherals still function through the same cut-out.

5Gbps headroom for data and charging

The link operates at up to 5Gbps, which handles typical bulk-endpoint traffic such as file transfers, sensor streams or peripheral charging without saturation. Bandwidth drops to USB 2.0 speeds when a 2.0-only device is attached, so the connector never forces a faster negotiation than the peripheral supports. The rugged housing and sealed cap keep the signal path reliable in environments where dust or moisture would defeat an unprotected panel jack.

Highlights

  • Converts USB 3.0 to USB-C for modern device connectivity
  • M24×1.5 threaded nut secures panel mount in a 25mm cutout
  • Up to 5Gbps transfer speed with USB 2.0 backward compatibility
  • Waterproof and dustproof cap protects the port from contaminants
  • Zinc alloy shell withstands harsh industrial environments

Specifications

BrandLORDWORLD

Questions about this item

What panel cut-out size does the M24×1.5 thread require?

Cut a 25 mm diameter hole; the supplied M24×1.5 nut then secures the adapter from behind the panel.

Which side of the adapter is the USB 3.0 input and which is the USB-C output?

The USB 3.0 female socket connects to the host or cable inside the enclosure; the USB-C female socket faces outward for device connection.

How do I keep the USB-C port sealed when no cable is plugged in?

Fit the included waterproof dust cap over the external USB-C socket to block moisture and debris.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.