We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

LORDWORLD

LORDWORLD USB 3.2 Gen 1 to M.2 SATA NGFF Enclosure Adapter

SKU CH-PKMY-KCRA2

An aluminum USB 3.2 Gen 1 enclosure turns a SATA M.2 2242, 2260 or 2280 SSD into a portable Type-C drive with a blue activity light

  • Works with SATA M.2 drives in 2242, 2260 and 2280 sizes
  • Reversible Type-C plug fits either way up
  • 5 Gbps USB 3.2 Gen 1 speed for fast transfers
  • Aluminium alloy body dissipates heat and stays portable
  • Blue LED shows real-time data activity status

SATA M.2 Enclosure for USB-C Devices

This aluminium adapter connects SATA-based M.2 NGFF SSDs in 2242 2260 and 2280 sizes to a USB 3.2 Gen 1 Type-C port. It supports B-key and B+M-key drives only and draws power directly from the host. The reversible USB-C connector works with laptops tablets and phones.

Suits SATA M.2 drives only.

Builders who need to read or write NVMe PCIe M-key drives cannot use this enclosure. Users without a USB-C port will require a separate adapter. The device does not support M-key NVMe SSDs regardless of physical fit.

Key specification: SATA-only M.2 NGFF support

The controller accepts only SATA-based M.2 NGFF modules with B-key or B+M-key pinouts. Any drive labelled PCIe or NVMe will not function. Verify the SSD label before purchase to ensure compatibility.

Highlights

  • Works with SATA M.2 drives in 2242, 2260 and 2280 sizes
  • Reversible Type-C plug fits either way up
  • 5 Gbps USB 3.2 Gen 1 speed for fast transfers
  • Aluminium alloy body dissipates heat and stays portable
  • Blue LED shows real-time data activity status

Specifications

BrandLORDWORLD

Questions about this item

What M.2 SATA SSD lengths fit the LORDWORLD enclosure?

The enclosure accepts 2242, 2260 and 2280 mm SATA-based NGFF drives with B Key or B+M Key.

How do you install the SSD and which step is often missed?

Slide the SSD into the M.2 slot at an angle, press it down and secure it with the screw; the step often missed is confirming the drive is SATA NGFF, not NVMe.

What part may need replacement after extended use?

The USB Type-C cable or the controller IC can wear out and may require replacement.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.