We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Rectangular 3.5 inch front panel hub with two Type-C and two USB-A ports, silver finish

LORDWORLD

LORDWORLD USB 3.2 10Gbps 3.5" Front Panel Hub 2x Type-C 2x USB-A 20pin Type-E

SKU CH-MT6V-A01NW

A 3.5-inch front-panel hub adds two USB-C and two USB-A ports at 10 Gbps via a 20-pin Type-E header with optional SATA power

  • 10 Gbps on every port with USB 3.2 Gen 2
  • Two Type-C and two Type-A ports on the front panel
  • Fits a 3.5 inch drive bay for clean case integration
  • Powered from the motherboard header or a SATA power connector
  • 20-pin Type-E cable included at 2 ft length

Front-panel hub for 3.5-inch bay

The LORDWORLD adapter adds four USB 3.2 Gen 2 ports to a 3.5-inch drive bay. Two ports are USB Type-C and two are USB Type-A, each supporting up to 10 Gbps data transfer. It is aimed at builders who want fast front-panel connectivity for external drives or peripherals without using rear I/O.

Check motherboard header and power source

Your motherboard must provide a USB 3.2 20-pin Type-E header to supply the upstream connection. The included jumper block lets you choose between drawing power from that header or from a PSU SATA power connector. Verify that your board has the required header and that a SATA power lead is reachable if you prefer auxiliary power.

Steel bracket with 2 ft internal cable

The hub mounts in a standard 3.5-inch floppy bay using a metal bracket that secures with case screws. A 2 ft USB Type-C male to Type-E cable routes from the hub to the motherboard header. The fixed cable length determines routing options inside the chassis, and the bracket occupies one full 3.5-inch slot.

Highlights

  • 10 Gbps on every port with USB 3.2 Gen 2
  • Two Type-C and two Type-A ports on the front panel
  • Fits a 3.5 inch drive bay for clean case integration
  • Powered from the motherboard header or a SATA power connector
  • 20-pin Type-E cable included at 2 ft length

Specifications

BrandLORDWORLD

Questions about this item

What does the box include and what must I supply myself?

The hub ships with a 2 ft USB-C male to 20-pin Type-E cable and a power-supply jumper block. You must provide a motherboard with a USB 3.2 20-pin Type-E header and either a free SATA power connector from the PSU or the header itself for power.

Which version or capacity should I choose for this hub?

This is a single 3.5-inch front-panel model with four ports — two Type-C and two Type-A — all running at USB 3.2 Gen 2 10 Gbps. There are no alternative versions or capacities to select.

What does the 10 Gbps headline speed mean once the hub is installed in my PC?

Each of the four ports can transfer data at up to 10 Gbps when connected to a compatible USB 3.2 Gen 2 motherboard header. Actual throughput depends on the attached device, cable quality and system workload.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.