We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Small black enclosure with USB-C port and 16-pin Micro SATA connector

LORDWORLD

LORDWORLD USB 3.1 Type-C to 1.8 inch Micro SATA 16pin 7+9 gender changer

SKU CH-5PW0-04EDW

Connects a 1.8 inch Micro SATA 16 pin 7+9 SSD to a USB 3.1 Type-C port with USB 3.0 and USB 2.0 support

  • Connect 1.8 inch Micro SATA drives via USB 3.1 Type-C
  • Works with USB 3.0 and USB 2.0 ports for broad compatibility
  • 16-pin 7+9 gender changer fits Micro SATA SSDs and hybrids
  • Supports drives up to 5 mm thick
  • Does not support mSATA or standard SATA drives

USB-C to 1.8 inch Micro SATA Adapter

This adapter connects a 1.8 inch Micro SATA drive with a 16-pin 7+9 connector to a USB Type-C port. It enables external access to Micro SATA SSDs or hybrid drives through a standard USB interface. The unit supports USB 3.1 Gen 1, USB 3.0, and USB 2.0 connections. It is designed for drives with a thickness not exceeding 5mm.

For Micro SATA drive access via USB-C

It suits users who need to read or write data from a 1.8 inch Micro SATA SSD or hybrid drive using a modern USB-C host. It is not for users needing mSATA or standard SATA drive support. It is not for users whose drives exceed the 5mm thickness limit. It is not for users requiring an internal mounting solution rather than an external enclosure.

Micro SATA 16-pin 7+9 connector compatibility

The adapter works exclusively with drives using the specific 16-pin 7+9 Micro SATA interface. It does not support mSATA or standard SATA connectors. The drive thickness must not exceed 5mm to fit the enclosure. This connector type and physical constraint determine whether the adapter matches the target drive.

Highlights

  • Connect 1.8 inch Micro SATA drives via USB 3.1 Type-C
  • Works with USB 3.0 and USB 2.0 ports for broad compatibility
  • 16-pin 7+9 gender changer fits Micro SATA SSDs and hybrids
  • Supports drives up to 5 mm thick
  • Does not support mSATA or standard SATA drives

Specifications

BrandLORDWORLD

Questions about this item

How do I connect the 16-pin Micro SATA drive to the Type-C cable?

Align the 7+9 pin connector with the drive’s 16-pin port and press firmly until seated; the most common mistake is inserting the plug upside-down, which bends the delicate pins.

What upkeep does the adapter need over time?

No scheduled maintenance is required; keep the Type-C plug and Micro SATA socket free of dust and avoid bending the cable near the connectors to preserve signal integrity.

What limits transfer speed during long copy jobs?

The USB 3.1 Gen 1 interface caps sustained throughput at 5 Gbps, so extended writes will settle at that ceiling rather than the drive’s own maximum.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.