We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

LORDWORLD

LORDWORLD USB 3.1 to RJ45 2.5Gbps Network Adapter

SKU CH-CNSY-2YY0V

Adds a 2.5 Gbps Ethernet port via USB 3.1 with auto-negotiation down to 10 Mbps and status LEDs

  • 5 Gbps throughput for faster file transfers and smooth streaming
  • USB 3.1 interface enables broad motherboard compatibility
  • Aluminium housing with reinforced connectors resists wear from repeated use
  • Auto-negotiation at 10/100/1000/2500 Mbps works with Cat5e or better cable up to 100 m
  • Status LEDs give immediate link and activity feedback

USB 3.1 2.5Gbps Network Adapter

This USB 3.1 to RJ45 adapter adds a 2.5Gbps Ethernet port to desktops or laptops that lack one. It targets builders and remote workers who need wired bandwidth beyond standard gigabit without opening the case. The aluminium housing and status LEDs suit daily use on a desk or in a rack.

Standards support and cable reach

The adapter implements IEEE 802.3bz for 2.5GBASE-T plus auto-negotiation down to 1Gbps, 100M and 10M. It also supports PXE boot, Auto MDIX, IEEE 802.1Q VLAN tagging and IEEE 802.1P priority encoding. Cat5e or better UTP cable runs up to 100m are supported.

Driver-free setup and USB-C note

Windows and Linux typically recognise the device without extra drivers; plug the Type-A connector into a USB 3.1 port and the link lights confirm activity. For USB-C ports an OTG adapter is required, adding a small mechanical joint. Electromagnetic shielding and the aluminium body keep temperatures stable under load.

Highlights

  • 5 Gbps throughput for faster file transfers and smooth streaming
  • USB 3.1 interface enables broad motherboard compatibility
  • Aluminium housing with reinforced connectors resists wear from repeated use
  • Auto-negotiation at 10/100/1000/2500 Mbps works with Cat5e or better cable up to 100 m
  • Status LEDs give immediate link and activity feedback

Specifications

BrandLORDWORLD

Questions about this item

Will the aluminium housing or RJ45 port need replacement after heavy use?

The aluminium housing and reinforced connectors are built for long-term stability and resist wear from repeated power cycles.

What limits sustained 2.5 Gbps throughput on this adapter?

The USB 3.1 interface caps sustained throughput at its 10 Gbps lane speed, while auto-negotiation drops to 1 Gbps or 100 M if the cable or switch only supports lower rates.

How much heat and noise does the adapter produce when running all day?

The aluminium body dissipates heat quickly with no moving parts, so it stays silent and maintains stable transmission during continuous operation.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.