We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Short black cable with straight 3.5mm TRS plug and right-angle 5-pin LEMO connector

LORDWORLD

LORDWORLD SR-TRS-C05 Locking 3.5mm TRS to Right-Angle 5-Pin LEMO Reverse Timecode Cable 12.8in 32.5cm

SKU CH-MSGM-KAQ9G

Locking 3.5 mm TRS to right-angle 5-pin LEMO reverse timecode cable, 12.8 in (32.5 cm), for jam-syncing generators, slates and cameras

  • Locking 3.5mm TRS secures sync connection
  • Right-angle 5-pin LEMO reverse fits tight rigs
  • 8in length keeps cable runs short
  • Compatible with Arri Alexa and Sound Devices
  • Rugged connectors withstand professional production use

Locking 3.5mm TRS to Reverse LEMO Cable

This 12.8 inch (32.5 cm) cable connects a locking 3.5 mm TRS output to a right-angled 5-pin LEMO male reverse connector. It is built for production sound mixers and camera operators who need to jam-sync timecode between a generator or slate and a professional recorder or camera. The short, fully extended length keeps the link tidy on a rig or cart.

Replaces Straight or Non-Locking Timecode Leads

The right-angle LEMO hood reduces strain on panel-mounted ports and fits tight spaces behind battery plates or accessory brackets. The locking 3.5 mm plug prevents accidental disconnects during handheld or Steadicam work. Upgrade when your current cable lacks a reverse pinout, a secure lock, or a low-profile bend radius.

Verify Pinout and Port Gender Before Ordering

Confirm the source device provides timecode out on a 5-pin LEMO female port wired to the reverse standard used by Ambient, Denecke, Sound Devices Pro-Level Recorders, and Wooden B-Box. Ensure the destination accepts a locking 3.5 mm TRS input. This cable will not work with standard (non-reverse) LEMO pinouts or non-locking 3.5 mm jacks.

Highlights

  • Locking 3.5mm TRS secures sync connection
  • Right-angle 5-pin LEMO reverse fits tight rigs
  • 8in length keeps cable runs short
  • Compatible with Arri Alexa and Sound Devices
  • Rugged connectors withstand professional production use

Specifications

BrandLORDWORLD

Questions about this item

Will the right-angle 5-pin LEMO connector clear the housing on my TC-NEO or Sound Devices recorder?

The connector is a right-angled 5-pin LEMO male in reverse wiring, shaped to sit flush against compatible timecode generators, slates and professional recorders without protruding straight out.

How do I lock the 3.5 mm TRS plug into my camera so it will not pull free during a shoot?

The 3.5 mm TRS end uses a locking sleeve; push the plug fully in, then turn the knurled collar clockwise until it clicks — the step most people miss is tightening the collar after insertion.

When should I replace this cable if it sees daily field use on set?

Inspect the strain reliefs and pin contacts after every few weeks of daily use; replace the cable if the locking collar no longer engages cleanly or if intermittent timecode dropouts appear.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.