We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Y cable with two straight locking 3.5 mm plugs and one right-angled 3.5 mm plug, 33 cm

LORDWORLD

LORDWORLD SR-C2004 Dual Locking 3.5mm to Right-Angled 3.5mm Y Cable 33cm

SKU CH-YWCB-WJT1M

Combines two locking 3.5mm sources into one right-angled 3.5mm input with gold-plated connectors on a 33cm cable

  • Dual locking 3.5mm plugs secure wireless receivers firmly
  • Single right-angle 3.5mm output fits tight camera mic inputs cleanly
  • 33cm length keeps on-camera cabling short and tidy
  • Combines two audio sources into one recorder without a mixer
  • Gold-plated contacts resist corrosion for reliable signal transfer

Dual Locking 3.5mm Y Cable

This LORDWORLD SR-C2004 cable merges two locking 3.5mm sources into one right-angled 3.5mm plug for a camera, mixer or recorder. It targets videographers and sound operators who run dual wireless receivers and want a tidy, mixer-free connection. The 33cm length keeps runs short on a camera rig or inside an audio bag. Gold-plated contacts aim to preserve signal integrity and resist corrosion over time.

Replaces Separate Cables or a Mixer

Instead of running two individual leads or carrying a small mixer, this single Y cable combines both audio feeds at the camera input. The upgrade is worth it when you need a compact, tangle-free link for dual wireless systems such as the Saramonic Blink500, UwMic9, UwMic15, VmicLink5 or SR-WM4C. It also suits any 3.5mm source where a right-angle plug eases strain on the recorder jack. The locking connectors prevent accidental disconnects during handheld or gimbal work.

Check Your Input Jack and Source Connectors

Verify that your camera, mixer or recorder accepts a standard 3.5mm TRS microphone input before ordering. Each wireless receiver or audio source must provide a 3.5mm output that fits the locking plugs on this cable. The 33cm reach is designed for receivers mounted directly on the camera or seated in a bag; measure your rig to confirm the length is sufficient. This cable carries analogue stereo audio only and does not supply plug-in power or digital signals.

Highlights

  • Dual locking 3.5mm plugs secure wireless receivers firmly
  • Single right-angle 3.5mm output fits tight camera mic inputs cleanly
  • 33cm length keeps on-camera cabling short and tidy
  • Combines two audio sources into one recorder without a mixer
  • Gold-plated contacts resist corrosion for reliable signal transfer

Specifications

BrandLORDWORLD

Questions about this item

How much space do the two locking 3.5 mm plugs and the right-angled 3.5 mm plug need on my camera or recorder?

The cable is 33 cm long; each locking 3.5 mm connector fits a standard 3.5 mm jack on wireless receivers, and the single right-angled 3.5 mm connector plugs into a 3.5 mm mic input on a camera, mixer or recorder.

Which end do I connect first when hooking up two wireless receivers to one camera?

Insert the two locking 3.5 mm plugs into the receiver outputs until they click, then plug the right-angled 3.5 mm end into the camera mic input; the lock prevents accidental pull-out during recording.

Will the gold-plated contacts need cleaning or replacement after extended use?

Gold-plated connectors resist corrosion and maintain signal transfer; no scheduled cleaning or contact replacement is required under normal use.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.