We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Two short braided SFF-8087 to four SATA breakout cables

LORDWORLD

LORDWORLD SFF-8087 to 4 SATA SAS cable 0.5 m 2-pack

SKU CH-JYPN-TK5NE

Two SFF-8087 to four SATA breakout cables, each .5 m long, link a SAS controller to four drives at up to 6 Gb/s per drive

  • Connect four drives from one controller with SFF-8087 36-pin male to 4× SATA breakout
  • Each cable supports up to 6 Gb/s per drive for fast storage throughput
  • 5 m length keeps routing tidy inside compact chassis
  • Braided sleeve and tape weave protect wires and ease installation
  • Two cables included so you can populate multiple ports at once

SFF-8087 breakout cable for storage expansion

This LORDWORLD cable connects a Mini SAS 36-pin male port on a motherboard or RAID controller to four SATA 7-pin female connectors for hard drives or a backplane. Each drive receives up to 6 Gb/s data transfer. The .5 m length suits compact chassis and the braided weave aids routing. Two cables are included in the pack.

Suits builders adding SATA drives to a SAS HBA

The forward breakout design works only when the SFF-8087 plug goes into a controller or HBA; connecting it directly to a backplane will not function. Builders needing to link a backplane to a controller or requiring longer runs should choose a different cable orientation or length.

Straightforward internal install with labelled ends

Locking latches on the Mini SAS and SATA plugs secure each connection. The thin, taped braid flexes easily behind drive cages. The only common error is inserting the SFF-8087 end into a backplane instead of the controller, which prevents the link from working.

Highlights

  • Connect four drives from one controller with SFF-8087 36-pin male to 4× SATA breakout
  • Each cable supports up to 6 Gb/s per drive for fast storage throughput
  • 5 m length keeps routing tidy inside compact chassis
  • Braided sleeve and tape weave protect wires and ease installation
  • Two cables included so you can populate multiple ports at once

Specifications

BrandLORDWORLD

Questions about this item

Does my motherboard or RAID controller need an SFF-8087 port for this cable to work?

Yes, the host end is a 36-pin SFF-8087 male connector that plugs directly into a SAS HBA or PCIe controller with that port.

Will these cables work with the 3 Gb/s SATA drives I already have installed?

Each SATA breakout supports up to 6 Gb/s per drive, so existing 3 Gb/s drives will operate at their native speed without issue.

How can I verify the cable is seated correctly after I route it inside the case?

The SFF-8087 connector has a locking latch that clicks when fully inserted, and each SATA lead is labelled for easy confirmation.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.