We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Clear acrylic case with silver aluminium heatsink and small black PWM fan on top

LORDWORLD

LORDWORLD Raspberry Pi 5 Active Cooler & Acrylic Case 8000 RPM

SKU CH-ZRJ8-DE9X0

Official PWM cooler with aluminium heatsink and 8000 RPM fan mounts directly to Raspberry Pi 5 and includes a multi-layer acrylic case

  • Official PWM fan reads Pi 5 temperature for active cooling
  • Aluminium heatsink plus 8000 RPM fan prevents thermal throttling
  • 09 CFM airflow keeps board stable under heavy load
  • Tool-free mounting via two holes and four-pin JST connector
  • Multi-layer acrylic case with precise cut-outs for every port

Official Active Cooler for Raspberry Pi 5

This LORDWORLD kit combines an aluminium heatsink with a PWM fan and a multi-layer transparent acrylic case. It draws power from the board's 5 V DC supply and mounts directly to the two dedicated mounting holes on the Raspberry Pi 5. The fan speed adjusts automatically based on onboard temperature readings, keeping the single-board computer stable under heavy workloads. Builders who want a tidy, all-in-one thermal solution for Pi 5 will find everything needed in one package.

Replaces passive heatsinks or bare-board operation

A passive metal slab relies on ambient airflow and cannot react when the SoC spikes during compiles, media transcoding or AI inference. This active cooler moves up to 1.09 CFM at 8000 RPM ±15 %, so the board avoids thermal throttling without manual fan curves. The jump is worth it whenever sustained loads push the Pi 5 toward its temperature limit; light desktop use or headless server tasks may not need the extra airflow.

Quick installation with JST connector

The fan plugs into the four-pin JST header on the Pi 5 and the heatsink screws into the new mounting holes, so no soldering or extra wiring is required. Acrylic layers align with the board's port cut-outs, but over-tightening the screws can stress the plastic. Ensure the fan cable seats fully in the connector; a loose pin will stop PWM control and leave the fan either stalled or at full speed.

Highlights

  • Official PWM fan reads Pi 5 temperature for active cooling
  • Aluminium heatsink plus 8000 RPM fan prevents thermal throttling
  • 09 CFM airflow keeps board stable under heavy load
  • Tool-free mounting via two holes and four-pin JST connector
  • Multi-layer acrylic case with precise cut-outs for every port

Specifications

BrandLORDWORLD

Questions about this item

How much clearance does the acrylic case need around the Raspberry Pi 5?

The multi-layer transparent acrylic shell is designed with precise hole positions for the Raspberry Pi 5, so it fits the board outline without extra clearance.

Which connector on the Pi 5 does the cooler's fan plug into?

Connect the chassis fan to the four-pin JST connector on the board; the cooler also uses two new mounting holes for mechanical attachment.

How often should the fan be cleaned to maintain the 1.09 CFM airflow?

Dust buildup reduces the 1.09 CFM airflow; clean the fan and aluminum heatsink fins with compressed air every few months depending on environment.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.