LORDWORLD
LORDWORLD PCIe USB 3.2 Gen 2 Card 5 Ports (3× USB-C 2× USB-A) 10Gbps
Adds five USB ports — three USB-C and two USB-A — at up to 10 Gbps through any PCIe slot
- Adds five high-speed ports (three USB-C, two USB-A) via a single PCIe slot
- Delivers up to 10 Gbps transfer rates for rapid file moves
- Works with PCIe 3.0 and 2.0 boards in x1, x4, x8 or x16 slots
- Runs driver-free on Windows 10, 11 and macOS 10.8.2 or newer
- Backwards compatible with USB 3.0, 2.0 and 1.1 devices
Five-port USB 3.2 expansion card
The LORDWORLD PCIe card adds three USB-C and two USB-A ports to any desktop with a free PCI Express x1, x4, x8 or x16 slot. It delivers up to 10 Gbps transfer rates for external drives, cameras and peripherals. Backwards compatibility covers USB 3.0, 2.0 and 1.1 devices. Windows 10 and macOS 10.8.2 or later work without extra drivers.
Upgrade from limited onboard ports
This card replaces a motherboard that only offers a handful of legacy USB sockets or slower 5 Gbps headers. The jump is worth it when you regularly move large video files or connect multiple high-speed drives at once. It will not help if the bottleneck is the attached device itself, since actual throughput is limited by the connected hardware. Older Windows versions such as XP, Vista, 7 and Server 2008 require manual driver installation.
Straightforward slot installation
Power down the PC, unplug the mains cable and wait two minutes before fitting the card into any compatible PCIe slot. No auxiliary power connector is needed. The most common issue is forgetting the driver requirement on older operating systems, which leaves the new ports invisible until the supplied software is installed. Ensure the slot is fully seated to avoid intermittent disconnects.
Highlights
- Adds five high-speed ports (three USB-C, two USB-A) via a single PCIe slot
- Delivers up to 10 Gbps transfer rates for rapid file moves
- Works with PCIe 3.0 and 2.0 boards in x1, x4, x8 or x16 slots
- Runs driver-free on Windows 10, 11 and macOS 10.8.2 or newer
- Backwards compatible with USB 3.0, 2.0 and 1.1 devices
Specifications
| Brand | LORDWORLD |
|---|
Questions about this item
Does the card need a full-length x16 slot or will an x1 slot work?
It fits any PCI Express x1, x4, x8 or x16 socket on a PCIe 2.0 or 3.0 motherboard.
Why does the manual say to wait two minutes after unplugging the power cord before installing?
Residual charge in the power supply can damage the card; the wait lets capacitors discharge fully.
Will I need to replace any driver or firmware on Windows 11 later?
Windows 10 and 11 use the in-box driver, so no separate driver updates are required.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



