We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Green PCIe x4 card with gold edge connector, two USB-A and one USB-C ports, internal 19/20-pin header and Type-E connector

LORDWORLD

LORDWORLD PCIe USB 3.2 Gen 2 10Gbps Type-E 19/20pin Adapter

SKU CH-HBK4-49320

Adds two 10 Gbps USB 3.2 Gen 2 ports via a PCIe 3.0 x4 slot using an ASM3142+822 controller with dual power groups and a front-panel Type-E header

  • 10 Gbps per port via ASM3142+822 controller
  • Dual power groups supply two USB ports each
  • Front-panel Type-E header with 19/20-pin connector
  • PCIe 3.0 x4 gold-plated edge connector resists oxidation
  • Reliable materials deliver stable high-speed data transfer

PCIe USB 3.2 Gen 2 10Gbps Adapter

This PCIe expansion card adds two 10Gbps USB ports using an ASM3142+822 controller. It supports PCIe 3.0 bandwidth and includes a front-panel Type-E header alongside a Type-C port. Gold-plated PCIe x4 contacts resist oxidation for reliable connectivity. Dual power groups supply each port pair to maintain stable operation for connected devices.

Who this suits and who should look elsewhere

Builds that need extra 10Gbps USB Type-C and front-panel Type-E connectivity on a PCIe 3.0 slot will benefit. Systems without a free PCIe x4 slot or those requiring internal drive interfaces cannot use this adapter. Buyers needing more than two additional USB ports should consider other solutions.

Deciding specification: PCIe 3.0 x4

The card requires a PCIe 3.0 x4 slot and delivers 10Gbps per port via the ASM3142+822 chip. Verify your motherboard provides this slot type before purchase. The 19/20-pin Type-E header must match your case front-panel connector. Power is distributed across two groups to support attached peripherals.

Highlights

  • 10 Gbps per port via ASM3142+822 controller
  • Dual power groups supply two USB ports each
  • Front-panel Type-E header with 19/20-pin connector
  • PCIe 3.0 x4 gold-plated edge connector resists oxidation
  • Reliable materials deliver stable high-speed data transfer

Specifications

BrandLORDWORLD

Questions about this item

What motherboard slot is required to install the LORDWORLD PCIe USB 3.2 Gen 2 adapter?

A free PCIe 3.0 x4 slot is needed for the gold-plated edge connector on this card.

Will the internal 19/20-pin header work with my existing front-panel USB-C cable?

Yes, the on-board Type-E header follows the 19/20-pin layout used by current front-panel USB 3.2 Gen 2 cables.

How can I verify each port is running at 10 Gbps after installation?

Check Device Manager for the ASM3142 controller and run a USB 3.2 Gen 2 speed test; each port should show 10 Gbps link speed.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.