We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Small green circuit board with PCIe x1 edge connector and internal USB 3.1 Type-E header

LORDWORLD

LORDWORLD PCI-E 1x to USB 3.1 Header Adapter VL805

SKU CH-GN5E-EPDW7

Converts a PCI-E 1x slot into a USB 3.1 header for front-panel Type-E ports at up to 5 Gbit/s

  • Adds a USB 3.1 front-panel header via a spare PCI-E 1x slot
  • Delivers up to 5 Gbit/s throughput with the VL805 controller
  • Works with any existing USB 3.0 motherboard header
  • Compact card installs directly without extra cables or brackets
  • Enables USB 3.1 on cases whose board lacks a native header

PCI-E 1x to USB 3.1 Header Adapter

This adapter converts an available PCI-E 1x slot into a USB 3.1 header. It enables front-panel USB 3.1 ports on a chassis when the motherboard lacks a native header. The compact VL805 card plugs directly into the slot and requires no extra cables or brackets.

Builders adding front-panel USB 3.1

Suits system builders who have a free PCI-E 1x slot and need to connect a case USB 3.1 front-panel connector. Not for buyers who need more than one header or who require an internal USB 3.0 header instead of the 3.1 type-E connector.

5 Gbit/s via VL805 controller

The VL805 controller delivers up to 5 Gbit/s over the USB 3.1 header. The card fits any standard USB 3.0 header on the motherboard and bundles the connection into a single USB 3.1 interface.

Highlights

  • Adds a USB 3.1 front-panel header via a spare PCI-E 1x slot
  • Delivers up to 5 Gbit/s throughput with the VL805 controller
  • Works with any existing USB 3.0 motherboard header
  • Compact card installs directly without extra cables or brackets
  • Enables USB 3.1 on cases whose board lacks a native header

Specifications

BrandLORDWORLD

Questions about this item

How do I install the VL805 adapter into a PCI-E 1x slot and connect the front panel?

Insert the card directly into any free PCI-E 1x slot on the motherboard, then plug the case front-panel cable into the on-board USB 3.1 header; the keyed connector prevents reversed insertion, which is the step most often missed.

What maintenance or replacement will the VL805 adapter need over time?

No scheduled maintenance is required; the solid-state controller has no moving parts, so only a physical failure or a motherboard upgrade would prompt replacement.

What throughput limit appears first when the VL805 adapter runs sustained transfers?

The PCI-E 1x host link and the VL805 controller both top out at 5 Gbit/s, so that bus ceiling is the first bottleneck during continuous high-load traffic.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.