We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Silver NVMe enclosure with transparent case and aluminium plate, USB-C cable attached

LORDWORLD

LORDWORLD NVME SSD Enclosure Silver

SKU CH-DGKF-4BTAF

Tool-free M.2 enclosure with JMS583 controller reaches 10 Gbps over USB 3.1 Gen 2 Type-C for NVME drives up to 2 TB

  • Transparent case lets you see the installed drive
  • Tool-free design installs an NVME SSD in under three minutes
  • USB 3.1 Gen 2 Type-C with JMS583 controller delivers up to 10 Gbps transfer speed
  • Works with Windows, Linux and Mac OS for plug-and-play use
  • Supports 2230, 2242, 2260 and 2280 M-Key NVME SSDs up to 2 TB

Tool-free NVMe enclosure for M-key SSDs

This USB 3.1 Gen 2 Type-C enclosure accepts M-key NVMe SSDs in 2230, 2242, 2260 and 2280 form factors up to 2 TB. It is built for users who need portable, driver-free access to PCIe-based storage on Windows, Linux or macOS. The transparent shell lets you confirm the installed drive at a glance.

Cables, thermal pads and status LED included

The package supplies a Type-C to Type-C cable and a USB-A to Type-C cable for broad host compatibility. Two thermal pads and a screw set handle heat transfer and secure mounting without tools. An activity indicator shows power and data status, while hot-swap support lets you change drives without rebooting.

JMS583 controller enables 10 Gbps transfer ceiling

The JMS583 bridge with UASP and TRIM support delivers up to 10 Gbps theoretical bandwidth and real-world read or write speeds above 950 MB/s with compatible SSDs. This single controller specification determines whether the enclosure can saturate your USB 3.1 Gen 2 port.

Highlights

  • Transparent case lets you see the installed drive
  • Tool-free design installs an NVME SSD in under three minutes
  • USB 3.1 Gen 2 Type-C with JMS583 controller delivers up to 10 Gbps transfer speed
  • Works with Windows, Linux and Mac OS for plug-and-play use
  • Supports 2230, 2242, 2260 and 2280 M-Key NVME SSDs up to 2 TB

Specifications

BrandLORDWORLD

Questions about this item

Will the included thermal pads need replacing after extended use?

Two thermal pads ship with the enclosure; they sit between the SSD and the aluminium plate to conduct heat away. Under normal desktop workloads they last for years, but if the SSD runs very hot they can be swapped for fresh pads of the same thickness.

What transfer ceiling does the JMS583 controller hit during long sequential workloads?

The JMS583 controller is rated for up to 10 Gbps over USB 3.1 Gen 2, and real-world sustained reads and writes level off around 950 MB/s with a compatible NVME SSD.

Does the aluminium plate keep the drive cool enough for all-day operation without a fan?

The aluminium plate acts as a passive heatsink; combined with the two supplied thermal pads it dissipates heat silently, so the enclosure runs fan-less even during continuous transfers.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.