Monoprice Inc. 601196 8-Channel 1/4" TRS Snake Cable 20ft 26AWG

Eight-channel TRS snake for studio patching

This 20 ft snake cable carries eight balanced mono or unbalanced stereo lines between gear fitted with 1/4-inch TRS jacks. Each channel uses a pair of 26 AWG conductors wrapped in aluminum foil shielding to reject EM and RF noise. Color-coded wires in red, white, green, yellow, black, blue, gray and brown simplify identification during setup. It suits home studios, project rooms and fixed installs that need a single multi-channel run.

Signal integrity over the full 20 ft run

The 26 AWG conductors and foil screen maintain consistent attenuation and common-mode rejection across the entire length. Balanced operation keeps hum and crosstalk low even when the snake runs alongside power cables or lighting dimmers. No active circuitry is involved, so performance does not vary with temperature or supply voltage. The cable is intended for line-level and instrument-level signals rather than speaker-level power.

Passive construction keeps noise and draw at zero

With no amplifiers, converters or active electronics, the snake adds no self-noise and draws no power. The only thermal contribution comes from ambient room temperature, and there are no fans or moving parts to generate acoustic noise. Weight is 4.04 units as supplied. Builders needing more than eight channels or a different connector format will require a separate solution.