We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Small green circuit board with M-key slot at one end and edge connector at the other

LORDWORLD

LORDWORLD NVME M-Key 2230 to 2280 Adapter ROG Flow X13

SKU CH-R4PC-2Y8MV

Adapter lets you install a 2280 NVME SSD in a 2230 slot on ROG Flow X13 models from 2021 to 2023 using PCI-Express 4.0 x4

  • Extends 2230 NVME to 2280 NVME for ROG Flow X13 2021-2023
  • PCI-Express 4.0 x4 enables full 2280 SSD support up to 8TB
  • Simple 20-minute upgrade process with clone-and-replace method
  • Pure NVME extension — no SATA conversion in either direction
  • Designed specifically for ROG Flow X13 gaming laptop compatibility

M-Key 2230 to 2280 Adapter for ROG Flow X13

This adapter lets you install a full-length 2280 NVME SSD in the ROG Flow X13 laptop. It connects the shorter 2230 slot to a longer drive using a PCI-Express 4.0 x4 link. The kit is built for the 2021 to 2023 models of the handheld gaming device.

For owners of the ROG Flow X13 needing more capacity

Builders who want to expand internal storage beyond the factory 2230 limit can use this part. It does not convert NVME signals to SATA, nor does it adapt SATA drives to NVME. Anyone requiring protocol conversion or a different form factor should look at other solutions.

PCI-Express 4.0 x4 interface support

The adapter maintains a PCI-Express 4.0 x4 connection between the laptop and the 2280 NVME drive. This bandwidth determines the maximum throughput available to the installed SSD. Confirm your drive and system both operate on this interface before purchase.

Highlights

  • Extends 2230 NVME to 2280 NVME for ROG Flow X13 2021-2023
  • PCI-Express 4.0 x4 enables full 2280 SSD support up to 8TB
  • Simple 20-minute upgrade process with clone-and-replace method
  • Pure NVME extension — no SATA conversion in either direction
  • Designed specifically for ROG Flow X13 gaming laptop compatibility

Specifications

BrandLORDWORLD

Questions about this item

How do I install the LORDWORLD 2230-to-2280 NVME adapter in my ROG Flow X13 and what step is commonly missed?

Insert the 2280 SSD into the adapter, clone the original 2230 drive to the new SSD, then swap the original module with the adapter assembly; skipping the clone step leaves the system unbootable.

What maintenance or replacement will the LORDWORLD NVME adapter need over time?

The passive adapter itself has no wear items; only the installed 2280 NVME SSD may eventually require replacement if its endurance limit is reached.

What limit appears first when the LORDWORLD PCI-Express 4.0 x4 adapter runs sustained workloads?

The bottleneck will be the thermal throttle point of the 2280 NVME SSD itself, since the adapter adds no active cooling or controller overhead.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.