We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
MiniSAS SFF-8087 breakout cable splitting to four SATA connectors, 3.3ft length

LORDWORLD

LORDWORLD MiniSAS SFF-8087 to 4x SATA 6Gbps 3.3ft

SKU CH-E67V-ECDH2

A MiniSAS SFF-8087 fan-out cable connects one controller port to four SATA drives at 6 Gbps over 3.3 ft

  • Connect SAS controllers to four SATA drives using a single SFF-8087 port
  • Transfer data at up to 6 Gbps per lane for fast storage performance
  • Fan-out design reduces cable clutter inside server chassis
  • Works with earlier SAS and SATA generations for flexible integration
  • Cost-effective solution for RAID arrays and high-performance workstations

SAS Controller Cable for SATA Drives

This new LORDWORLD cable connects a SAS controller to four SATA hard drives or SSDs using a single SFF-8087 connector. The fan-out design reduces clutter inside servers, workstations and storage enclosures while supporting data rates up to 6 Gbps per lane. At 3.3 ft long, it suits typical internal routing in rack or tower chassis.

Server and Workstation Storage Builders

The breakout suits administrators expanding direct-attached storage on RAID controllers or HBA cards that present an SFF-8087 port. It is backward compatible with earlier SAS and SATA generations for flexible integration. Builders needing to attach drives with SAS-native connectors or interfaces other than SATA should look at a different cable assembly.

SFF-8087 to Four SATA Fan-Out

The single Mini SAS SFF-8087 plug splits into four standard SATA data connectors, making this the decisive specification for matching your controller port to the installed drives. Each lane delivers up to 6 Gbps throughput for high-speed transfers in RAID or JBOD configurations. Verify that your controller exposes an SFF-8087 internal port before ordering.

Highlights

  • Connect SAS controllers to four SATA drives using a single SFF-8087 port
  • Transfer data at up to 6 Gbps per lane for fast storage performance
  • Fan-out design reduces cable clutter inside server chassis
  • Works with earlier SAS and SATA generations for flexible integration
  • Cost-effective solution for RAID arrays and high-performance workstations

Specifications

BrandLORDWORLD

Questions about this item

What SAS controller port does the SFF-8087 end plug into?

The SFF-8087 connector attaches directly to a standard internal MiniSAS port on your SAS RAID controller or HBA.

Will the four SATA connectors work with older 3 Gbps SATA drives?

Yes, the cable is backward compatible with earlier SATA generations so 3 Gbps drives will operate at their rated speed.

How can I verify each drive is running at 6 Gbps after installation?

Check the controller BIOS or OS disk utility; each drive should report a negotiated link speed of 6 Gbps per lane.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.