We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Small green circuit board with 40 pin connector and 1.8 inch ZIF socket

LORDWORLD

LORDWORLD Mini SATA mSATA PCI-E iPod SSD to 40pin 1.8inch ZIF CE Converter Card gender changer

SKU CH-4WKE-ZCJGN

Connects Mini SATA, mSATA and PCI-E SSDs to a 40-pin 1.8-inch ZIF CE interface

  • Connects mSATA SSDs to 40-pin ZIF CE sockets
  • Works with 1.8-inch drives in iPod or legacy devices
  • Single card handles PCI-E and SATA signals
  • New converter ready for immediate installation

LORDWORLD mSATA to 40-pin ZIF Adapter

This converter card bridges a Mini SATA mSATA or PCI-E SSD to a 40-pin 1.8-inch ZIF CE interface. It is intended for technicians and hobbyists repairing or upgrading legacy iPods and similar portable devices that use the ZIF connector style. The compact board provides a direct mechanical and electrical gender change without active components.

Passive signal routing under sustained load

As a passive adapter, it introduces no latency or protocol conversion overhead during continuous data transfers. Signal integrity depends on the quality of the mSATA drive and the host device's controller. The card does not regulate power, so the host must supply adequate current for the attached SSD during prolonged operation. Buyers needing hot-plug support or voltage translation will require an active solution.

Highlights

  • Connects mSATA SSDs to 40-pin ZIF CE sockets
  • Works with 1.8-inch drives in iPod or legacy devices
  • Single card handles PCI-E and SATA signals
  • New converter ready for immediate installation

Specifications

BrandLORDWORLD

Questions about this item

How much power does the converter card draw when the SSD runs all day?

The passive adapter has no active circuitry, so it adds no measurable power draw beyond the SSD itself.

What drive and host connector must I already have for this card to work?

You need an mSATA or mini-SATA SSD with a 40-pin 1.8-inch ZIF CE interface on the host side.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.