We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Mini SAS 36-pin to four SAS 29-pin breakout cable with SATA power, 3.3 ft

LORDWORLD

LORDWORLD Mini SAS SFF-8087 to 4x SFF-8482 breakout cable with SATA power 3.3ft

SKU CH-EXQQ-9TZAD

Connects a Mini SAS SFF-8087 host to four SFF-8482 drives at up to 6.0 Gbps with integrated SATA power over 3.3 ft

  • Connect raid controller to four drives using SFF-8087 to 4x SFF-8482 breakout
  • Power drives directly via integrated SATA power connector on the cable
  • Achieve 6.0 Gbps throughput per lane with multi-lane SAS architecture
  • Simplify SCSI setup with point-to-point serial attached SCSI interface
  • 3 ft length fits standard server chassis and storage enclosures

SFF-8087 to 4x SFF-8482 breakout cable

This LORDWORLD cable connects a Mini SAS SFF-8087 host controller to four SAS SFF-8482 drives. It includes a SATA power connector to supply the attached devices. The 3.3 ft length suits internal server and workstation chassis wiring.

For RAID and HBA drive arrays

It suits builders linking a single controller port to multiple SAS hard drives or SSDs. It does not serve setups that need a different target connector or an external port interface.

6.0 Gbps per lane throughput

Each of the four lanes supports up to 6.0 Gbps, determining the maximum data rate for connected drives. Verify that your controller and drives operate at this speed before purchasing.

Highlights

  • Connect raid controller to four drives using SFF-8087 to 4x SFF-8482 breakout
  • Power drives directly via integrated SATA power connector on the cable
  • Achieve 6.0 Gbps throughput per lane with multi-lane SAS architecture
  • Simplify SCSI setup with point-to-point serial attached SCSI interface
  • 3 ft length fits standard server chassis and storage enclosures

Specifications

BrandLORDWORLD

Questions about this item

How do I plug the SFF-8087 end into my RAID controller and which way do the four SFF-8482 connectors face?

Insert the 36-pin SFF-8087 male connector into the controller port until it clicks; each of the four 29-pin SFF-8482 plugs goes into a SAS drive with the keyed side aligned to the drive socket.

Will the SATA power lead on this breakout cable need replacement after heavy use?

The SATA power lead is moulded into the cable assembly; if the connector loosens or pins bend, replace the whole 3.3 ft cable rather than repairing the lead.

At what throughput does the 6.0 Gbps per lane limit appear during sustained transfers?

Each lane caps at 6.0 Gbps, so continuous writes across all four drives will hit that ceiling first before any controller bottleneck.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.