We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Mini SAS HD SFF-8643 male plug splitting into four SFF-8482 connectors each with SATA data and power, braided .5m cable

LORDWORLD

LORDWORLD Mini SAS HD SFF-8643 to 4x SFF-8482 SAS Cable .5m SATA Power

SKU CH-8DR5-ARSD9

A .5 m SFF-8643 breakout cable splits one Mini SAS HD port into four SFF-8482 connectors with integrated SATA 15-pin power for up to four drives at 6 Gb/s each

  • Connect four drives from one controller via SFF-8643 to 4x SFF-8482 breakout
  • Each drive receives integrated SATA 7-pin data and 15-pin power connectors
  • Supports 6 Gb/s data transfer rate per connected drive
  • Braided tape-weave cable design simplifies internal routing and cable management
  • 5 m length with labelled connectors eases installation in tight chassis

Internal SAS breakout for four drives

This cable connects a Mini SAS HD SFF-8643 host port to four SFF-8482 drive connectors. It is intended for builders who need to attach SATA or SAS hard drives directly to a controller or motherboard. Each breakout end combines a 7-pin data connector with a 15-pin SATA power connector. The assembly is sold new and measures .5 metres.

Build integration and constraints

The SFF-8643 male end plugs into a SAS HBA or PCIe controller; it must not be connected to a backplane. Four SATA power cables from the power supply are required to energise the drive adapters. The thin, tape-braided construction helps routing inside tight chassis. Drives connect via the SFF-8482 interfaces which carry both SAS and SATA signalling.

Bundled labelling and power delivery

Every breakout leg is labelled to simplify cable management during installation. The integrated SATA power connectors remove the need for separate drive power splitters. Data transfer operates at up to 6Gbs per attached drive. No software or drivers accompany the cable.

Highlights

  • Connect four drives from one controller via SFF-8643 to 4x SFF-8482 breakout
  • Each drive receives integrated SATA 7-pin data and 15-pin power connectors
  • Supports 6 Gb/s data transfer rate per connected drive
  • Braided tape-weave cable design simplifies internal routing and cable management
  • 5 m length with labelled connectors eases installation in tight chassis

Specifications

BrandLORDWORLD

Questions about this item

Will the SFF-8643 connector handle sustained 6 Gb/s per drive without throttling?

The cable is rated for up to 6 Gb/s per drive across its four SFF-8482 breakout connectors, so sustained throughput depends on the host controller and drives rather than the cable itself.

Does the braided SFF-8643 to 4x SFF-8482 cable run hot or draw extra power during all-day operation?

The cable is passive and carries only signalling and SATA power through to each drive; it generates no measurable heat and adds no power draw beyond what the attached drives require.

Which host-side connector must my controller or motherboard provide for this SFF-8643 breakout cable?

You need a Mini SAS HD SFF-8643 male port on your SAS HBA, PCIe controller or motherboard to plug the cable's host connector into.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.