We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Small rectangular circuit board with USB 3.0 connector inside protective case

LORDWORLD

LORDWORLD Mini PCI-E mSATA to USB 3.0 Adapter with Case

SKU CH-7ESM-WWDSH

Converts a 1.8" mSATA drive to USB 3.0 for portable external storage up to 200 MB/s

  • Create a fast external SSD using mSATA drives
  • USB 3.0 interface delivers real-world speeds up to 200 MB/s
  • Fits standard 1.8 inch mSATA form factor
  • Compact case design makes the adapter highly portable
  • Only works with mSATA connectors, not 50 mm Mini PCI-e SATA or PATA

What this adapter does

The LORDWORLD adapter converts a standard 1.8" mSATA drive into a USB 3.0 external SSD. Real-world transfer rates can reach 200 MB/s by saturating the USB 3.0 bus. The compact enclosure makes the drive portable for data recovery or extra storage on any computer with a USB port.

Included case benefit

A protective case is supplied with the PCB adapter board. It shields the bare mSATA drive from physical damage and static discharge during transport. The enclosure also provides a standard USB 3.0 Type-A connector so no separate cable is required for immediate use.

Compatibility check

This adapter works only with mSATA drives that use the SATA protocol. It does not support 50 mm Mini PCI-e SATA or Mini PCI-e PATA cards, so verify your drive matches the mSATA form factor and connector keying before ordering.

Highlights

  • Create a fast external SSD using mSATA drives
  • USB 3.0 interface delivers real-world speeds up to 200 MB/s
  • Fits standard 1.8 inch mSATA form factor
  • Compact case design makes the adapter highly portable
  • Only works with mSATA connectors, not 50 mm Mini PCI-e SATA or PATA

Specifications

BrandLORDWORLD

Questions about this item

Will the mSATA drive need any firmware updates or driver installs to work with this USB 3.0 adapter?

No firmware updates or drivers are required; the adapter presents the mSATA drive as a standard USB mass-storage device to the host.

What speed ceiling will I hit first when copying large files continuously?

The USB 3.0 interface caps sustained throughput at about 200 MB/s, so that bus limit appears before the drive itself saturates.

Does the enclosure get hot or draw extra power during all-day transfers?

The small PCB has no active cooling; it relies on the case and ambient airflow, and power comes entirely from the USB port.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.