We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Open M.2 SSD dock with USB-C cable, silver finish

LORDWORLD

LORDWORLD M.2 NVMe SATA SSD Dock 10Gbps USB 3.2 Gen 2 JMS581DL

SKU CH-1RWJ-6R68R

Connects M.2 NVMe and SATA SSDs via USB 3.2 Gen 2 at up to 10 Gbps using a JMS581DL chip with UASP, S.M.A.R.T. monitoring, TRIM support, and passive cooling

  • Read both NVMe and SATA M.2 drives in one dock with the JMS581DL chip
  • Transfer data at up to 10Gbps over USB 3.2 Gen 2 with UASP acceleration
  • Protect data integrity using built-in S.M.A.R.T. monitoring and adaptive TRIM
  • Dissipate heat passively through the open-air enclosure design
  • Swap drives instantly with the tool-free, plug-and-play M.2 slot

Dual-protocol M.2 dock for NVMe and SATA

The LORDWORLD adapter uses a JMS581DL controller to read both NVMe and SATA M-key or B+M-key SSDs through one USB 3.2 Gen 2 port. It targets users who need quick, tool-free access to different drive types without opening a computer case.

Passive cooling with 10 Gbps NVMe ceiling

An open-frame design relies on natural airflow to dissipate heat while the drive operates. NVMe SSDs can reach the interface limit of 10 Gbps with UASP enabled, whereas SATA drives remain capped at 6 Gbps by their own specification. Drives may become warm during sustained transfers.

S.M.A.R.T. monitoring and TRIM support built in

The bridge firmware exposes S.M.A.R.T. health data and issues adaptive TRIM commands to maintain write performance and extend SSD lifespan. No drivers or bundled software are required; the dock works plug-and-play on any host with a compatible USB port.

Highlights

  • Read both NVMe and SATA M.2 drives in one dock with the JMS581DL chip
  • Transfer data at up to 10Gbps over USB 3.2 Gen 2 with UASP acceleration
  • Protect data integrity using built-in S.M.A.R.T. monitoring and adaptive TRIM
  • Dissipate heat passively through the open-air enclosure design
  • Swap drives instantly with the tool-free, plug-and-play M.2 slot

Specifications

BrandLORDWORLD

Questions about this item

How do I install an M.2 SSD into the JMS581DL dock without damaging the connector?

Align the notch on the M.2 SSD with the keyed M.2 slot, press it in fully until it seats, and secure it if a latch is present; the tool-free design requires no screws, but always safely eject the drive in your OS before unplugging the dock.

What maintenance does the JMS581DL dock need to keep NVMe and SATA SSDs running at peak write speeds?

The dock handles maintenance internally via built-in S.M.A.R.T. health diagnostics and adaptive TRIM that optimise data block management, so no user maintenance is required beyond keeping the open vents clear for passive cooling.

What is the first speed limit I will hit when writing continuously to an NVMe SSD through this USB 3.2 Gen 2 dock?

The USB 3.2 Gen 2 interface caps sustained transfers at 10Gbps, so even if the NVMe SSD is faster, the dock’s 10Gbps link becomes the bottleneck during heavy write workloads.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.